OMAP3503DCBC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | 515-VFBGA, FCBGA |
| Number of Pins | 515 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | OMAP-35xx |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 515 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Graphics Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Frequency | 600MHz |
| Base Part Number | OMAP3503 |
| Pin Count | 515 |
| Voltage | 1.35V |
| Interface | I2C, MMC, SDIO, UART, USB |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| RAM Size | 64kB |
| Memory Type | L2 Cache, ROM, SRAM |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Core Processor | ARM® Cortex®-A8 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 12 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Voltage - I/O | 1.8V 3.0V |
| Number of UART Channels | 3 |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LPDDR |
| USB | USB 1.x (3), USB 2.0 (1) |
| Additional Interfaces | HDQ/1-Wire, I2C, McBSP, McSPI, MMC/SD/SDIO, UART |
| Co-Processors/DSP | Multimedia; NEON™ SIMD |
| Barrel Shifter | NO |
| Internal Bus Architecture | SINGLE |
| Display & Interface Controllers | LCD |
| Height Seated (Max) | 0.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OMAP3503DCBC Overview
Shipping overseas is convenient thanks to the embedded microprocessor's packaging in 515-VFBGA, FCBGA. High reliability is achieved by using advanced packaging methods Tray. In the CPU, there are 1 Core 32-Bit cores and 1 Core 32-Bit bus width. K0°C~90°C TJw what the operating temperature is around 0°C~90°C TJ. It comes from the OMAP-35xx series. The CPU is cored by a processor with a number of 0 cores. Memory controllers for this CPU are LPDDR. With its HDQ/1-Wire, I2C, McBSP, McSPI, MMC/SD/SDIO, UART interfaces, this microprocessor will be able to serve you better. There is 1.8V 3.0V I/O running on this CPU. The type DIGITAL SIGNAL PROCESSOR, OTHER belongs to uPs/uCs/Peripheral ICs. Use OMAP3503 when searching for variants of the embedded microprocessor. A total of 515 terminations have been recorded. A 1.8V voltage supply should be used to turn on and run the cpu microprocessor. A CPU operates at a frequency of 600MHz. Please refer to the datasheets for 515 pins functions. A typical Graphics Processors embedded microprocessor. The bandwidth required to transfer data is 32b. Embedded microprocessor bodies are injected with 515 pins. With the Surface Mount mounted, this CPU is widely used in a wide range of applications. 1.35V is the voltage on the CPU core. It is designed with 0 RAM (Random-Access Memory). In a normal situation, users should not supply the CPU microprocessor with a voltage higher than 1.89V. It is recommended that the lowest voltage be fed to the micro processor is 1.71V. 12 counters are used to help tell how busy the CPU is. This embedded microprocessor is equipped with 3 UART (Universal Asynchro3us Receiver/Transmitter) channels
OMAP3503DCBC Features
ARM? Cortex?-A8 Core
32b-Bit Data Bus Width
64kB RAM
OMAP3503DCBC Applications
There are a lot of Texas Instruments OMAP3503DCBC Microprocessor applications.
- Toasters
- Fabric
- Oil and gas
- Electronic jamming systems
- Food and beverage
- Industrial control field
- Wastewater treatment
- Smartphone
- Pacemakers (used to control abnormal heart rhythm)
- Communication-bluetooth, Wi-Fi, radio
