OMAP3515DCBB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | 515-VFBGA, FCBGA |
| Number of Pins | 515 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | OMAP-35xx |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 515 |
| Subcategory | Graphics Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 600MHz |
| Base Part Number | OMAP3515 |
| Pin Count | 515 |
| Voltage | 1.35V |
| Interface | I2C, MMC, SDIO, UART, USB |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| RAM Size | 64kB |
| Memory Type | L2 Cache, ROM, SRAM |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Core Processor | ARM® Cortex®-A8 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 12 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Voltage - I/O | 1.8V 3.0V |
| Number of UART Channels | 3 |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | Yes |
| RAM Controllers | LPDDR |
| USB | USB 1.x (3), USB 2.0 (1) |
| Additional Interfaces | HDQ/1-Wire, I2C, McBSP, McSPI, MMC/SD/SDIO, UART |
| Co-Processors/DSP | Multimedia; NEON™ SIMD |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Display & Interface Controllers | LCD |
| Height | 610μm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OMAP3515DCBB Overview
Due to its 515-VFBGA, FCBGA packaging, it is convenient to ship overseas. High reliability is achieved by using advanced packaging methods Tray. Cores/Bus width of the CPU is 1 Core 32-Bit . Be aware of the operating temperature around 0°C~90°C TJ. The OMAP-35xx series contains it. ARM? Cortex?-A8 processors are embedded in this CPU. Memory controllers for this CPU are LPDDR. This microprocessor features HDQ/1-Wire, I2C, McBSP, McSPI, MMC/SD/SDIO, UART interfaces to better serve its users. As far as I/O is concerned, this CPU runs at 1.8V 3.0V. It is a DIGITAL SIGNAL PROCESSOR, OTHER in terms of uPs/uCs/Peripheral ICs. If you are looking for variants of the cpu microprocessor, try search with OMAP3515. Total terminations are 515. Using a 1.8V voltage supply, you should be able to operate the cpu microprocessor. CPUs operate at 600MHz Hz. Please refer to the datasheets for 515 pins functions. Typical Graphics Processors cpu microprocessor. The bandwidth required to transfer data is 32b. Micro processor body consists of 515 pins. There are many applications that use the CPU with Surface Mount mounted. Currently, the CPU core voltage is 1.35V. RAM (Random Access Memory) is designed to be 64kB. The embedded microprocessor should not be supplied with a voltage higher than 1.89V. It is recommended that the lowest voltage be fed to the micro processor is 1.71V. CPU activity is measured by the 12 counters. A total of 3 UART (Universal Asynchro3us Receiver/Transmitter) channels are available on this embedded microprocessor
OMAP3515DCBB Features
ARM? Cortex?-A8 Core
32b-Bit Data Bus Width
64kB RAM
OMAP3515DCBB Applications
There are a lot of Texas Instruments OMAP3515DCBB Microprocessor applications.
- Computer/laptop
- Safety field
- Removable disks
- Electronic jamming systems
- Mobile computers
- Food and beverage
- Instrument control
- 8. Navigation control field
- Oil and gas
- Microwave ovens
