OMAP3525DCBB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | 515-VFBGA, FCBGA |
| Number of Pins | 515 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | OMAP-35xx |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 515 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Graphics Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Frequency | 600MHz |
| Base Part Number | OMAP3525 |
| Pin Count | 515 |
| Voltage | 1.35V |
| Interface | I2C, MMC, SDIO, UART, USB |
| Max Supply Voltage | 1.35V |
| Min Supply Voltage | 985mV |
| RAM Size | 64kB |
| Memory Type | L2 Cache, ROM, SRAM |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM® Cortex®-A8 |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 12 |
| Address Bus Width | 26 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.0V |
| Number of UART Channels | 3 |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | Yes |
| RAM Controllers | LPDDR |
| USB | USB 1.x (3), USB 2.0 (1) |
| Additional Interfaces | HDQ/1-Wire, I2C, McBSP, McSPI, MMC/SD/SDIO, UART |
| Co-Processors/DSP | Signal Processing; C64x+, Multimedia; NEON™ SIMD |
| Display & Interface Controllers | LCD |
| Height Seated (Max) | 0.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OMAP3525DCBB Overview
Packed in 515-VFBGA, FCBGA, the microprocessor is convenient for shipping overseas. A high level of reliability is provided by using an advanced packaging method Tray. CPUs have 1 Core 32-Bit cores/bus width. It is important to understand the operating temperature around 0°C~90°C TJ. It comes from the OMAP-35xx series. The CPU is powered by a ARM? Cortex?-A8 core. A total of LPDDR RAM controllers are used by this CPU. This microprocessor features interfaces HDQ/1-Wire, I2C, McBSP, McSPI, MMC/SD/SDIO, UART. In this CPU, I/O is set to 1.8V 3.0V. As far as the uPs/uCs/Peripheral ICs type is concerned, this is a MICROPROCESSOR, RISC. Use OMAP3525 to search for variants of the cpu microprocessor. In total, 515 terminations have been made. Turn on the cpu microprocessor and let it run with a 1.8V voltage supply. 32-Bit is its architecture. The CPU operates at a frequency of 600MHz. For information about 515 pins, please refer to the datasheet. As a typical Graphics Processors, this cpu microprocessor has Graphics Processors display. It is important to note that there is 32b bandwidth available for data transfer. Embedded microprocessor bodies are injected with 515 pins. This CPU is widely used in a variety of applications with its Surface Mount mounting. There is 1.35V voltage present in the CPU core. Random-Access Memory (RAM) is designed with an amount of 64kB KB. The embedded microprocessor should not be supplied with a voltage higher than 1.35V. A voltage of 985mV is recommended for feeding the embedded microprocessor. It is possible to tell how busy the CPU is by using 12 counters. It features 3 UART (Universal Asynchro3us Receiver/Transmitter) channels
OMAP3525DCBB Features
ARM? Cortex?-A8 Core
32-Bit Structure
32b-Bit Data Bus Width
64kB RAM
OMAP3525DCBB Applications
There are a lot of Texas Instruments OMAP3525DCBB Microprocessor applications.
- Electronic jamming systems
- Consumer electronics products
- Refrigerators
- Entertainment-radios, CD players, televisions
- Mobile computers
- Sonography (Ultrasound imaging)
- Home video and audio
- Entertainment products
- Set-top boxes
- Network communication, mobile communication field
