OMAP3525DZCBC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | 515-VFBGA, FCBGA |
| Number of Pins | 515 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | OMAP-35xx |
| JESD-609 Code | e1 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 515 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Graphics Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 600MHz |
| Base Part Number | OMAP3525 |
| Pin Count | 515 |
| Voltage | 1.35V |
| Max Supply Voltage | 1.35V |
| Min Supply Voltage | 985mV |
| RAM Size | 64kB |
| Memory Type | L2 Cache, ROM, SRAM |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM® Cortex®-A8 |
| Data Bus Width | 32b |
| Address Bus Width | 26 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.0V |
| Number of UART Channels | 3 |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | Yes |
| RAM Controllers | LPDDR |
| USB | USB 1.x (3), USB 2.0 (1) |
| Additional Interfaces | HDQ/1-Wire, I2C, McBSP, McSPI, MMC/SD/SDIO, UART |
| Co-Processors/DSP | Signal Processing; C64x+, Multimedia; NEON™ SIMD |
| Display & Interface Controllers | LCD |
| Height Seated (Max) | 1mm |
| Length | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OMAP3525DZCBC Overview
The embedded microprocessor ships overseas conveniently packed in 515-VFBGA, FCBGA. High reliability can be achieved by using the advanced packaging method Tray. 1 Core 32-Bit cores/Bus width are present in the CPU. It is important to understand the operating temperature around 0°C~90°C TJ. A OMAP-35xx series item. The CPU is cored by a processor with a number of 0 cores. There are LPDDR RAM controllers used by this CPU. Microprocessors with HDQ/1-Wire, I2C, McBSP, McSPI, MMC/SD/SDIO, UART interfaces are designed to serve users better. This CPU runs I/O at 1.8V 3.0V. The type MICROPROCESSOR, RISC belongs to uPs/uCs/Peripheral ICs. You can search for variants of a microprocessor with OMAP3525. As a whole, there are 515 terminations. A 1.8V voltage supply should be used to turn on and run the cpu microprocessor. A CPU operates at a frequency of 600MHz. For information about 515 pins, please refer to the datasheet. The cpu microprocessor Graphics Processors is typical. Data transfer has 32b bandwidths. There are 515 pins injected into the embedded microprocessor body. This CPU is widely used in many applications because of its Surface Mount mount. Currently, the CPU core voltage is 1.35V. There is 64kB RAM (Random Access Memory) built in. The embedded microprocessor should not be supplied with a voltage higher than 1.35V. A voltage of 985mV is recommended for feeding the embedded microprocessor. It features 3 UART (Universal Asynchro3us Receiver/Transmitter) channels
OMAP3525DZCBC Features
ARM? Cortex?-A8 Core
32b-Bit Data Bus Width
64kB RAM
OMAP3525DZCBC Applications
There are a lot of Texas Instruments OMAP3525DZCBC Microprocessor applications.
- Christmas lights
- Projectors
- Equipment control
- Paper shredders
- Telephone sets
- Agriculture, transportation field
- Metering & measurement field
- Coffee machines
- Oscilloscopes
- Speed meter
