OMAP3525DZCBCA
| Parameters | |
|---|---|
| Series | OMAP-35xx |
| JESD-609 Code | e1 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 515 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Graphics Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 600MHz |
| Base Part Number | OMAP3525 |
| Pin Count | 515 |
| Voltage | 1.35V |
| Max Supply Voltage | 1.35V |
| Min Supply Voltage | 985mV |
| RAM Size | 64kB |
| Memory Type | L2 Cache, ROM, SRAM |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM® Cortex®-A8 |
| Data Bus Width | 32b |
| Address Bus Width | 26 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.0V |
| Number of UART Channels | 3 |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | Yes |
| RAM Controllers | LPDDR |
| USB | USB 1.x (3), USB 2.0 (1) |
| Additional Interfaces | HDQ/1-Wire, I2C, McBSP, McSPI, MMC/SD/SDIO, UART |
| Co-Processors/DSP | Signal Processing; C64x+, Multimedia; NEON™ SIMD |
| Display & Interface Controllers | LCD |
| Height Seated (Max) | 1mm |
| Length | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | 515-VFBGA, FCBGA |
| Number of Pins | 515 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
OMAP3525DZCBCA Overview
Packed in 515-VFBGA, FCBGA, the microprocessor is convenient for shipping overseas. High reliability is provided by the advanced packaging method Tray. There are 1 Core 32-Bit cores per bus width on the CPU. Recognize operating temperatures around -40°C~105°C TJ. It comes from the OMAP-35xx series. The CPU is powered by a ARM? Cortex?-A8 core. There are LPDDR RAM controllers used by this CPU. The microprocessor features interfaces HDQ/1-Wire, I2C, McBSP, McSPI, MMC/SD/SDIO, UART for better service. There is 1.8V 3.0V I/O running on this CPU. uPs/uCs/Peripheral ICs type is MICROPROCESSOR, RISC. The microprocessor can be searched for with OMAP3525 if you are looking for variants. The total number of terminations is 515. 600MHz is the frequency of the CPU. 515 pin functions are described in the datasheets. A typical Graphics Processors embedded microprocessor. Generally, data transfer takes place at a rate of 32b bandwidth. Micro processor body consists of 515 pins. With the Surface Mount mounted, this CPU is widely used in a wide range of applications. Currently, the CPU core voltage is 1.35V. It is designed to have RAM (Random-Access Memory) of 64kB. normal operation of the microprocessor should not require the device to be powered by a voltage higher than 1.35V. Micro processors should be supplied with 985mV as their lowest voltage. This embedded microprocessor has 3 UART (Universal Asynchro3us Receiver/Transmitter) channels
OMAP3525DZCBCA Features
ARM? Cortex?-A8 Core
32b-Bit Data Bus Width
64kB RAM
OMAP3525DZCBCA Applications
There are a lot of Texas Instruments OMAP3525DZCBCA Microprocessor applications.
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Printers
- Ipod
- 3D printers
- DCS control intelligent sensor
- PDAs, game consoles
- Tape drives
- Security systems
- Calculators
- Sonography (Ultrasound imaging)
