OMAP3525ECBB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Package / Case | 515-VFBGA, FCBGA |
| Number of Pins | 515 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | OMAP-35xx |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 515 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Graphics Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.4mm |
| Frequency | 600MHz |
| Base Part Number | OMAP3525 |
| Pin Count | 515 |
| Voltage | 1.35V |
| Interface | I2C, SPI, UART, USB |
| Max Supply Voltage | 1.35V |
| Min Supply Voltage | 985mV |
| Memory Size | 112kB |
| RAM Size | 64kB |
| Memory Type | L2 Cache, ROM, SRAM |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM® Cortex®-A8 |
| Data Bus Width | 32b |
| Core Architecture | ARM |
| Voltage - I/O | 1.8V 3.0V |
| Number of UART Channels | 3 |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | Yes |
| RAM Controllers | LPDDR |
| USB | USB 1.x (3), USB 2.0 (1) |
| Additional Interfaces | HDQ/1-Wire, I2C, McBSP, McSPI, MMC/SD/SDIO, UART |
| Co-Processors/DSP | Signal Processing; C64x+, Multimedia; NEON™ SIMD |
| Display & Interface Controllers | LCD |
| Height | 900μm |
| Length | 12mm |
| Width | 12mm |
| Thickness | 610μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OMAP3525ECBB Overview
Packed in 515-VFBGA, FCBGA, the microprocessor is convenient for shipping overseas. High reliability can be achieved by using the advanced packaging method Tray. A CPU with 1 Core 32-Bit cores and width 1 Core 32-Bit busses is used. Understand the operating temperature around 0°C~90°C TJ. In the OMAP-35xx series, it is found. ARM? Cortex?-A8 is the processor core of this CPU. Memory controllers for this CPU are LPDDR. Featuring HDQ/1-Wire, I2C, McBSP, McSPI, MMC/SD/SDIO, UART interfaces, this microprocessor can better serve you. The CPU runs I/O at 1.8V 3.0V. There is MICROPROCESSOR, RISC MICROPROCESSOR, RISC in the uPs, uCs, or peripheral ICs categories. To find variants of the microprocessor, try searching with OMAP3525. Total terminations are 515. A 600MHz frequency is used by the CPU. To learn about the functions of the pins 515 please refer to their datasheets. A typical Graphics Processors embedded microprocessor. Data transfer has 32b bandwidths. A total of 515 pins are injected into the CPU microprocessor's body. This CPU is widely used in many applications because of its Surface Mount mount. 1.35V is the voltage on the CPU core. RAM (Random Access Memory) is designed to be 64kB. Users should not supply the embedded microprocessor with voltages higher than 1.35V in normalcircumstances. It is recommended to feed the CPU microprocessor with a voltage of 985mV. 112kB is the size of the CPU's memory. There are 3 UART (Universal Asynchro3us Receiver/Transmitter) channels on this embedded microprocessor
OMAP3525ECBB Features
ARM? Cortex?-A8 Core
32b-Bit Data Bus Width
64kB RAM
OMAP3525ECBB Applications
There are a lot of Texas Instruments OMAP3525ECBB Microprocessor applications.
- Home video and audio
- Tape drives
- Pacemakers (used to control abnormal heart rhythm)
- DCS control intelligent sensor
- Microwave ovens
- Traditional industrial transformation
- Smart highways (navigation, traffic control, information monitoring and car service)
- Printers
- Office automation equipment and computer peripherals
- Oil and gas
