OMAP3525ECUS
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 423 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Graphics Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 600MHz |
| Base Part Number | OMAP3525 |
| Pin Count | 423 |
| Voltage | 1.35V |
| Interface | I2C, SPI, UART, USB |
| Max Supply Voltage | 1.35V |
| Min Supply Voltage | 985mV |
| Memory Size | 112kB |
| RAM Size | 64kB |
| Memory Type | L2 Cache, ROM, SRAM |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM® Cortex®-A8 |
| Data Bus Width | 32b |
| Core Architecture | ARM |
| Voltage - I/O | 1.8V 3.0V |
| Number of UART Channels | 3 |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | Yes |
| RAM Controllers | LPDDR |
| USB | USB 1.x (3), USB 2.0 (1) |
| Additional Interfaces | HDQ/1-Wire, I2C, McBSP, McSPI, MMC/SD/SDIO, UART |
| Co-Processors/DSP | Signal Processing; C64x+, Multimedia; NEON™ SIMD |
| Display & Interface Controllers | LCD |
| Height | 1.4mm |
| Length | 16mm |
| Width | 16mm |
| Thickness | 960μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Package / Case | 423-LFBGA, FCBGA |
| Number of Pins | 423 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | OMAP-35xx |
| JESD-609 Code | e1 |
| Part Status | Active |
OMAP3525ECUS Overview
Due to its 423-LFBGA, FCBGA packaging, it is convenient to ship overseas. In order to provide high reliability, advanced packaging method Tray is used. There are 1 Core 32-Bit cores/bus width on the CPU. Understand how the operating temperature around 0°C~90°C TJ is determined. OMAP-35xx is its series number. The CPU is cored by a processor with a number of 0 cores. This CPU uses LPDDR RAM controllers. To serve better this microprocessor features HDQ/1-Wire, I2C, McBSP, McSPI, MMC/SD/SDIO, UART interfaces. At 1.8V 3.0V, the CPU runs its I/O. I would rate this as a MICROPROCESSOR, RISC for the uPs/uCs/Peripheral ICs type. Use OMAP3525 when searching for variants of the embedded microprocessor. In total, 423 terminations have been made. CPUs operate at 600MHz Hz. For functions of 423 pins, please refer to the datasheets. A typical Graphics Processors embedded microprocessor. Data can be transferred over 32b bandwidths. 423 pins are injected into the part body. In many applications, this CPU is mounted with a Surface Mount bus. 1.35V is the CPU core voltage. There is 64kB RAM (Random Access Memory). It is generally recommended that users do not supply their embedded microprocessors with voltages higher than 1.35V. The lowest voltage that should be applied to the micro processor is 985mV. There is 112kB memory on the CPU. A total of 3 UART (Universal Asynchro3us Receiver/Transmitter) channels are available on this embedded microprocessor
OMAP3525ECUS Features
ARM? Cortex?-A8 Core
32b-Bit Data Bus Width
64kB RAM
OMAP3525ECUS Applications
There are a lot of Texas Instruments OMAP3525ECUS Microprocessor applications.
- Washing machines
- Leakage current tester
- DCS control intelligent sensor
- Robotic prosthetic limbs
- Coffee machines
- Projectors
- Sonography (Ultrasound imaging)
- Microwave ovens
- Walkie talkies
- Telephone sets
