OMAP3530DCBC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | 515-VFBGA, FCBGA |
| Number of Pins | 515 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | OMAP-35xx |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 515 |
| Subcategory | Graphics Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Frequency | 720MHz |
| Base Part Number | OMAP3530 |
| Pin Count | 515 |
| Voltage | 1.35V |
| Interface | I2C, MMC, SDIO, UART, USB |
| Max Supply Voltage | 1.35V |
| Min Supply Voltage | 985mV |
| Speed | 600 MHz |
| RAM Size | 64kB |
| Memory Type | L2 Cache, ROM, SRAM |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM® Cortex®-A8 |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 12 |
| Address Bus Width | 26 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.0V |
| Number of UART Channels | 3 |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | Yes |
| RAM Controllers | LPDDR |
| USB | USB 1.x (3), USB 2.0 (1) |
| Additional Interfaces | HDQ/1-Wire, I2C, McBSP, McSPI, MMC/SD/SDIO, UART |
| Co-Processors/DSP | Signal Processing; C64x+, Multimedia; NEON™ SIMD |
| Display & Interface Controllers | LCD |
| Height Seated (Max) | 1mm |
| Length | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OMAP3530DCBC Overview
The embedded microprocessor has been packed in 515-VFBGA, FCBGA for convenient overseas shipping. The packaging method Tray provides high reliability. There are 1 Core 32-Bit cores/bus width on the CPU. Be aware of the operating temperature around 0°C~90°C TJ. It comes from the OMAP-35xx series. This CPU is cored with a ARM? Cortex?-A8 processor. The CPU uses LPDDR RAM controllers. With its HDQ/1-Wire, I2C, McBSP, McSPI, MMC/SD/SDIO, UART interfaces, this microprocessor will be able to serve you better. There is 1.8V 3.0V I/O running on this CPU. A MICROPROCESSOR, RISC represents the uPs/uCs/Peripheral ICs type. Try searching for variants of the cpu microprocessor with OMAP3530. In total, 515 terminations have been made. A 1.8V voltage supply should be used to turn on and run the cpu microprocessor. An architecture based on 32 bits is used. There is 720MHz frequency set for the CPU. To learn about the functions of the pins 515 please refer to their datasheets. As a Graphics Processors, this cpu microprocessor is typical. The size of data Bus of the CPU is based on 32b-bit system. A total of 515 pins are injected into the CPU microprocessor's body. Surface Mount mounted, this CPU is widely used in many applications. 1.35V is the voltage on the CPU core. In general, RAM (Random-Access Memory) is designed with a 64kB of 0MB. Users should not supply a microprocessor with more voltage than 1.35V under normalcircumstances. A voltage of 985mV is recommended for feeding the embedded microprocessor. Counters 12 indicate how busy the CPU is. 3 UART (Universal Asynchro3us Receiver/Transmitter) channels are provided with this CPU microprocessor
OMAP3530DCBC Features
ARM? Cortex?-A8 Core
32-Bit Structure
32b-Bit Data Bus Width
64kB RAM
OMAP3530DCBC Applications
There are a lot of Texas Instruments OMAP3530DCBC Microprocessor applications.
- Ipad
- Tape drives
- Christmas lights
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Mice
- Metering & measurement field
- Switches
- Teletext terminals
- Virtual reality VR robots
- Ipod
