OMAP3530DCBC72
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | 515-VFBGA, FCBGA |
| Number of Pins | 515 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | OMAP-35xx |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 515 |
| Subcategory | Graphics Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Frequency | 720MHz |
| Base Part Number | OMAP3530 |
| Pin Count | 515 |
| Voltage | 1.35V |
| Max Supply Voltage | 1.35V |
| Min Supply Voltage | 985mV |
| RAM Size | 64kB |
| Memory Type | L2 Cache, ROM, SRAM |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM® Cortex®-A8 |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Address Bus Width | 26 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.0V |
| Number of UART Channels | 3 |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | Yes |
| RAM Controllers | LPDDR |
| USB | USB 1.x (3), USB 2.0 (1) |
| Additional Interfaces | HDQ/1-Wire, I2C, McBSP, McSPI, MMC/SD/SDIO, UART |
| Co-Processors/DSP | Signal Processing; C64x+, Multimedia; NEON™ SIMD |
| Display & Interface Controllers | LCD |
| Height Seated (Max) | 1mm |
| Length | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OMAP3530DCBC72 Overview
The embedded microprocessor has been packed in 515-VFBGA, FCBGA for convenient overseas shipping. High reliability can be achieved by using the advanced packaging method Tray. 1 Core 32-Bit cores/Bus width are present in the CPU. Be aware of the operating temperature around 0°C~90°C TJ. In the OMAP-35xx series, it is found. A ARM? Cortex?-A8 processor powers this CPU. The CPU uses LPDDR RAM controllers. This microprocessor has HDQ/1-Wire, I2C, McBSP, McSPI, MMC/SD/SDIO, UART interfaces to serve you better. As far as I/O is concerned, this CPU runs at 1.8V 3.0V. As far as the uPs/uCs/Peripheral ICs type is concerned, this is a MICROPROCESSOR, RISC. To find variants of the microprocessor, try searching with OMAP3530. As a whole, there are 515 terminations. When the voltage supply is 1.8V, the cpu microprocessor should be powered on and run. A 32-Bit architecture is used. There is 720MHz frequency set for the CPU. For information about 515 pins, please refer to the datasheet. The cpu microprocessor Graphics Processors is typical. It is important to note that there is 32b bandwidth available for data transfer. There are 515 pins injected into the embedded microprocessor body. As a result of its Surface Mount mounting, this CPU is widely used in a wide variety of applications. 1.35V is the CPU core voltage. A 64kB amount of RAM (Random-Access Memory) is designed. normal operation of the microprocessor should not require the device to be powered by a voltage higher than 1.35V. A voltage of 985mV is recommended for feeding the embedded microprocessor. This embedded microprocessor is equipped with 3 UART (Universal Asynchro3us Receiver/Transmitter) channels
OMAP3530DCBC72 Features
ARM? Cortex?-A8 Core
32-Bit Structure
32b-Bit Data Bus Width
64kB RAM
OMAP3530DCBC72 Applications
There are a lot of Texas Instruments OMAP3530DCBC72 Microprocessor applications.
- Torpedo guidance
- Consumer electronics products
- Smart highways (navigation, traffic control, information monitoring and car service)
- Binding machines
- Pacemakers (used to control abnormal heart rhythm)
- Hand-held metering systems
- Projectors
- Medical instruments chromatographs
- Ipad
- Security systems
