Parameters |
Mount |
Surface Mount |
Package / Case |
515-VFBGA, FCBGA |
Number of Pins |
515 |
Operating Temperature |
-40°C~105°C TJ |
Packaging |
Tray |
Series |
OMAP-35xx |
JESD-609 Code |
e1 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
515 |
Terminal Finish |
Tin/Silver/Copper (Sn/Ag/Cu) |
Subcategory |
Graphics Processors |
Technology |
CMOS |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.65mm |
Frequency |
720MHz |
Base Part Number |
OMAP3530 |
Pin Count |
515 |
Voltage |
1.35V |
Interface |
I2C, MMC, SDIO, UART, USB |
Max Supply Voltage |
1.35V |
Min Supply Voltage |
985mV |
Speed |
600 MHz |
RAM Size |
64kB |
Memory Type |
L2 Cache, ROM, SRAM |
uPs/uCs/Peripheral ICs Type |
MICROPROCESSOR, RISC |
Core Processor |
ARM® Cortex®-A8 |
Bit Size |
32 |
Data Bus Width |
32b |
Number of Timers/Counters |
12 |
Address Bus Width |
26 |
Core Architecture |
ARM |
Boundary Scan |
YES |
Low Power Mode |
YES |
Format |
FLOATING POINT |
Integrated Cache |
YES |
Voltage - I/O |
1.8V 3.0V |
Number of UART Channels |
3 |
Number of Cores/Bus Width |
1 Core 32-Bit |
Graphics Acceleration |
Yes |
RAM Controllers |
LPDDR |
USB |
USB 1.x (3), USB 2.0 (1) |
Additional Interfaces |
HDQ/1-Wire, I2C, McBSP, McSPI, MMC/SD/SDIO, UART |
Co-Processors/DSP |
Signal Processing; C64x+, Multimedia; NEON™ SIMD |
Display & Interface Controllers |
LCD |
Height Seated (Max) |
1mm |
Length |
14mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
OMAP3530DCBCA Overview
Shipping overseas is convenient since the embedded microprocessor is packed in 515-VFBGA, FCBGA. Using advanced packaging techniques Tray, high reliability is ensured. 1 Core 32-Bit cores/Bus width are present in the CPU. Extended operating temperature around -40°C~105°C TJ. This is part of the OMAP-35xx series. The CPU is cored by a processor with a number of 0 cores. LPDDR RAM controllers are used by this CPU. This microprocessor is equipped with an interface of HDQ/1-Wire, I2C, McBSP, McSPI, MMC/SD/SDIO, UART. This CPU runs I/O at 1.8V 3.0V. It is a MICROPROCESSOR, RISC in terms of uPs/uCs/Peripheral ICs. Try searching for variants of the cpu microprocessor with OMAP3530. There are 515 terminations totally. With a 1.8V voltage supply, the part should be turned on and run. The architecture of the microprocessor is 32-bit. 720MHz is the frequency of the CPU. For functions of 515 pins, please refer to the datasheets. An example of a Graphics Processors embedded microprocessor. The size of data Bus of the CPU is based on 32b-bit system. Injecting pins into the embedded microprocessor body results in 515 pins. Many applications use this CPU with Surface Mount mounted. There is 1.35V voltage at the CPU core. There is 64kB RAM (Random Access Memory). A voltage greater than 1.35V should not normally be applied to the embedded microprocessor. In order for the micro processor to work at its best, it should be fed a voltage of 985mV. The CPU's idle time can be determined by 12 counters. This embedded microprocessor has 3 UART (Universal Asynchro3us Receiver/Transmitter) channels
OMAP3530DCBCA Features
ARM? Cortex?-A8 Core
32-Bit Structure
32b-Bit Data Bus Width
64kB RAM
OMAP3530DCBCA Applications
There are a lot of Texas Instruments OMAP3530DCBCA Microprocessor applications.
- Glucose monitoring systems (for Type 1 Diabetes)
- Consumer electronics products
- Computers and laptops-video calling, email, blogging
- Aerospace navigation systems
- Oil and gas
- Light sensing & controlling devices
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Digital TVs
- Telephone sets
- Printers