OMAP3530ECBC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Package / Case | 515-VFBGA, FCBGA |
| Number of Pins | 515 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | OMAP-35xx |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 515 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Graphics Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 600MHz |
| Base Part Number | OMAP3530 |
| Pin Count | 515 |
| Voltage | 1.35V |
| Interface | I2C, SPI, UART, USB |
| Max Supply Voltage | 1.35V |
| Min Supply Voltage | 985mV |
| Memory Size | 112kB |
| RAM Size | 64kB |
| Memory Type | L2 Cache, ROM, SRAM |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM® Cortex®-A8 |
| Data Bus Width | 32b |
| Core Architecture | ARM |
| Voltage - I/O | 1.8V 3.0V |
| Number of UART Channels | 3 |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | Yes |
| RAM Controllers | LPDDR |
| USB | USB 1.x (3), USB 2.0 (1) |
| Additional Interfaces | HDQ/1-Wire, I2C, McBSP, McSPI, MMC/SD/SDIO, UART |
| Co-Processors/DSP | Signal Processing; C64x+, Multimedia; NEON™ SIMD |
| Display & Interface Controllers | LCD |
| Height | 950μm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 630μm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
OMAP3530ECBC Overview
The embedded microprocessor has been packed in 515-VFBGA, FCBGA for convenient overseas shipping. High reliability is achieved with advanced packaging method Tray. 1 Core 32-Bit cores/Bus width are present in the CPU. K0°C~90°C TJw what the operating temperature is around 0°C~90°C TJ. This is a member of the OMAP-35xx series. The CPU is cored with a ARM? Cortex?-A8 processor. LPDDR RAM controllers are used by this CPU. With its HDQ/1-Wire, I2C, McBSP, McSPI, MMC/SD/SDIO, UART interfaces, this microprocessor will be able to serve you better. In this CPU, I/O is set to 1.8V 3.0V. I would rate this as a MICROPROCESSOR, RISC for the uPs/uCs/Peripheral ICs type. To find variants of the microprocessor, try searching with OMAP3530. In total, there are 515 terminations. There is 600MHz frequency set for the CPU. Datasheets for 515 pin functions can be found here. An example of a Graphics Processors microprocessor can be found here. It is important to note that there is 32b bandwidth available for data transfer. There are 515 pins injected into the embedded microprocessor body. As a result of its Surface Mount mounting, this CPU is widely used in a wide variety of applications. It is 1.35V on the CPU's core. Random-Access Memory (RAM) is designed with an amount of 64kB KB. Microprocessors should never be supplied with voltages above 1.35V in normalcircumstances. The lowest voltage that should be applied to the micro processor is 985mV. Its memory size is 112kB. 3 UART (Universal Asynchro3us Receiver/Transmitter) channels are provided by this CPU microprocessor
OMAP3530ECBC Features
ARM? Cortex?-A8 Core
32b-Bit Data Bus Width
64kB RAM
OMAP3530ECBC Applications
There are a lot of Texas Instruments OMAP3530ECBC Microprocessor applications.
- Automatic staplers
- Walkie talkies
- Agriculture, transportation field
- Smoke alarms
- X-ray
- Communication-bluetooth, Wi-Fi, radio
- Office automation equipment and computer peripherals
- Automobile
- Heart rate monitors
- Set-top boxes
