OMAP5910JGZG2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | 289-TFBGA |
| Number of Pins | 289 |
| Weight | 284.997756mg |
| Operating Temperature | -40°C~85°C TC |
| Packaging | Tray |
| Series | OMAP-59xx |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 289 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 1.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 150MHz |
| Base Part Number | OMAP5910 |
| Pin Count | 289 |
| Operating Supply Voltage | 1.6V |
| Voltage | 1.675V |
| Interface | I2C, MMC, SDIO, UART, USB |
| Memory Size | 32kB |
| Nominal Supply Current | 170mA |
| RAM Size | 160kB |
| Memory Type | FLASH |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, MIXED |
| Core Processor | ARM9TDMI |
| Bit Size | 16 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 6 |
| Address Bus Width | 25 |
| On Chip Program ROM Width | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 2.75V 3.3V |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | SDRAM |
| USB | USB 2.0 (2) |
| Additional Interfaces | 1-Wire/HDQ, AC97, I2C, I2S, IrDA, McBSP, MCSI, MICROWIRE, MMC/SD, SPI, UART |
| Co-Processors/DSP | Signal Processing; C55x, System Control; CP15 |
| ROM Programmability | MROM |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Display & Interface Controllers | Keypad, LCD |
| Number of DMA Channels | 6 |
| Height Seated (Max) | 1.2mm |
| Length | 12mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OMAP5910JGZG2 Overview
Due to its 289-TFBGA packaging, it is convenient to ship overseas. High reliability can be achieved by using the advanced packaging method Tray. 1 Core 32-Bit cores/Bus width are present in the CPU. It is important to understand the operating temperature around -40°C~85°C TC. A OMAP-59xx series item. The CPU is powered by a ARM9TDMI core. This CPU uses SDRAM RAM controllers. This microprocessor is equipped with an interface of 1-Wire/HDQ, AC97, I2C, I2S, IrDA, McBSP, MCSI, MICROWIRE, MMC/SD, SPI, UART. The CPU runs I/O at 1.8V 2.75V 3.3V. It is a DIGITAL SIGNAL PROCESSOR, MIXED in terms of uPs/uCs/Peripheral ICs. Use OMAP5910 when searching for variants of the embedded microprocessor. As a whole, there are 289 terminations. Turning on and running the embedded microprocessor with a 1.6V voltage supply should be possible. 16-Bit is its architecture. 150MHz is the frequency of the CPU. For information about 289 pins, please refer to the datasheet. As a Digital Signal Processors, this cpu microprocessor is typical. The bandwidth required to transfer data is 32b. Injecting pins into the embedded microprocessor body results in 289 pins. There are many applications for this CPU, since it is Surface Mount mounted. In order to function, the embedded microprocessor must be set to 1.6V. Currently, the CPU core voltage is 1.675V. It is designed with 0 RAM (Random-Access Memory). Its memory size is 32kB. CPU activity is measured by the 6 counters. The DMA (Direct Memory Access) process is programmed using 6 channels.
OMAP5910JGZG2 Features
ARM9TDMI Core
16-Bit Structure
32b-Bit Data Bus Width
160kB RAM
OMAP5910JGZG2 Applications
There are a lot of Texas Instruments OMAP5910JGZG2 Microprocessor applications.
- Christmas lights
- Smart instruments
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Industrial control field
- Keyboards
- DVD\DV\MP3 players
- Toys
- Embedded gateways
- Microwave ovens
- Mice
