OMAP5910JZZG2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Package / Case | 289-TFBGA |
| Number of Pins | 289 |
| Weight | 274.791928mg |
| Operating Temperature | -40°C~85°C TC |
| Packaging | Tray |
| Series | OMAP-59xx |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 289 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 150MHz |
| Base Part Number | OMAP5910 |
| Pin Count | 289 |
| Operating Supply Voltage | 1.6V |
| Voltage | 1.675V |
| Interface | I2C, MMC, SDIO, UART, USB |
| Memory Size | 32kB |
| Nominal Supply Current | 170mA |
| RAM Size | 160kB |
| Memory Type | FLASH |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, MIXED |
| Core Processor | ARM9TDMI |
| Bit Size | 16 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 6 |
| Address Bus Width | 25 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 2.75V 3.3V |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | SDRAM |
| USB | USB 2.0 (2) |
| Additional Interfaces | 1-Wire/HDQ, AC97, I2C, I2S, IrDA, McBSP, MCSI, MICROWIRE, MMC/SD, SPI, UART |
| Co-Processors/DSP | Signal Processing; C55x, System Control; CP15 |
| ROM Programmability | MROM |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Display & Interface Controllers | Keypad, LCD |
| Number of DMA Channels | 6 |
| Height Seated (Max) | 1.2mm |
| Length | 12mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OMAP5910JZZG2 Overview
The microprocessor is convenient for international shipping since it is packaged in 289-TFBGA. In order to provide high reliability, advanced packaging method Tray is used. A CPU with 1 Core 32-Bit cores and width 1 Core 32-Bit busses is used. Understand the operating temperature around -40°C~85°C TC. In the OMAP-59xx series, it is found. This CPU is cored with a ARM9TDMI processor. A CPU with this architecture uses SDRAM RAM controllers. Microprocessors with 1-Wire/HDQ, AC97, I2C, I2S, IrDA, McBSP, MCSI, MICROWIRE, MMC/SD, SPI, UART interfaces are designed to serve users better. I/O is run at 1.8V 2.75V 3.3V on this CPU. It is a DIGITAL SIGNAL PROCESSOR, MIXED in terms of uPs/uCs/Peripheral ICs. Try searching for variants of the cpu microprocessor with OMAP5910. In total, there are 289 terminations. A 1.6V voltage supply should be used to turn on and run the cpu microprocessor. 16-Bit is its architecture. 150MHz is the frequency of the CPU. For information about 289 pins, please refer to the datasheet. This microprocessor is a typical Digital Signal Processors. It is important to note that there is 32b bandwidth available for data transfer. There are 289 pins injected into the embedded microprocessor body. With the Surface Mount mounted, this CPU is widely used in a wide range of applications. The micro processor can function from 1.6V. 1.675V is the CPU core voltage. Random-Access Memory (RAM) is designed with an amount of 160kB KB. A CPU has a memory size of 32kB bytes. 6 counters are used to help tell how busy the CPU is. To program DMA (Direct Memory Access), 6 channels are used.
OMAP5910JZZG2 Features
ARM9TDMI Core
16-Bit Structure
32b-Bit Data Bus Width
160kB RAM
OMAP5910JZZG2 Applications
There are a lot of Texas Instruments OMAP5910JZZG2 Microprocessor applications.
- Consumer electronics products
- Measurement and control field
- Digital TVs
- Computed Tomography (CT scan)
- Volt meter
- Entertainment products
- Smartphone
- Leakage current tester
- ECG machine
- Binding machines
