OMAPL132BZWTA2E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | 361-LFBGA |
| Number of Pins | 361 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Series | OMAP-L1x |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 361 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1V |
| Terminal Pitch | 0.8mm |
| Frequency | 200MHz |
| Base Part Number | OMAPL132 |
| Pin Count | 361 |
| Operating Supply Voltage | 1.8V |
| Voltage | 1.32V |
| Memory Size | 64kB |
| RAM Size | 128kB |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR CIRCUIT |
| Core Processor | ARM926EJ-S |
| Data Bus Width | 32b |
| Number of Timers/Counters | 3 |
| Core Architecture | ARM |
| Voltage - I/O | 1.8V 3.3V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LPDDR, DDR2 |
| USB | USB 2.0 + PHY (1) |
| Additional Interfaces | AC97, I2C, I2S, McASP, McBSP, MMC/SD/SDIO, SPI, UART |
| Co-Processors/DSP | Signal Processing; C674x, System Control; CP15 |
| Height Seated (Max) | 1.4mm |
| Length | 16mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OMAPL132BZWTA2E Overview
Since the microprocessor is packed in 361-LFBGA, shipping overseas is convenient. In order to provide high reliability, advanced packaging method Tray is used. Cores/Bus width of the CPU is 1 Core 32-Bit . The operating temperature around -40°C~105°C TJ should be understood. In the series OMAP-L1x, it is found. ARM926EJ-S processors are embedded in this CPU. A total of LPDDR, DDR2 RAM controllers are used by this CPU. The microprocessor features interfaces AC97, I2C, I2S, McASP, McBSP, MMC/SD/SDIO, SPI, UART for better service. As far as I/O is concerned, this CPU runs at 1.8V 3.3V. A MICROPROCESSOR CIRCUIT represents the uPs/uCs/Peripheral ICs type. Using OMAPL132 will help you find variants of the cpu microprocessor. In total, there are 361 terminations. When the voltage supply is 1V, the cpu microprocessor should be powered on and run. At 200MHz, the CPU operates. Datasheets for 361 pin functions can be found here. An example of a Other Microprocessor ICs embedded microprocessor. To transfer data, there is a bandwidth of 32b. Micro processor body consists of 361 pins. As a result of its Surface Mount mounting, this CPU is widely used in a wide variety of applications. In this case, 1.8V is the starting point. A 1.32V core voltage is present on the CPU. It is designed with 0 RAM (Random-Access Memory). A CPU is equipped with a 64kB sized memory. To determine the CPU's efficiency, 3 counters are used.
OMAPL132BZWTA2E Features
ARM926EJ-S Core
32b-Bit Data Bus Width
128kB RAM
OMAPL132BZWTA2E Applications
There are a lot of Texas Instruments OMAPL132BZWTA2E Microprocessor applications.
- Heart rate monitors
- Temperature sensing and controlling devices
- Smoke alarms
- Computer/laptop
- Tape drives
- Blood pressure monitors
- Dryers
- Toys
- Firewalls
- Christmas lights
