OMAPL137BZKB4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | 256-BGA |
| Number of Pins | 256 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | OMAP-L1x |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.3V |
| Terminal Pitch | 1mm |
| Frequency | 456MHz |
| Base Part Number | OMAPL137 |
| Pin Count | 256 |
| Voltage | 1.32V |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Core Processor | ARM926EJ-S |
| Address Bus Width | 13 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 16 |
| Format | FLOATING POINT |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 3 |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | SDRAM |
| USB | USB 1.1 + PHY (1), USB 2.0 + PHY (1) |
| Additional Interfaces | HPI, I2C, McASP, MMC/SD, SPI, UART |
| Co-Processors/DSP | Signal Processing; C674x, System Control; CP15 |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Display & Interface Controllers | LCD |
| Height Seated (Max) | 2.05mm |
| Length | 17mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OMAPL137BZKB4 Overview
The embedded microprocessor ships overseas conveniently packed in 256-BGA. Advanced packaging method Tray is used to provide high reliability. Cores/Bus width is 1 Core 32-Bit. Be aware of the operating temperature around 0°C~90°C TJ. It comes from the OMAP-L1x series. This CPU is cored with a ARM926EJ-S processor. The CPU uses SDRAM RAM controllers. With its HPI, I2C, McASP, MMC/SD, SPI, UART interfaces, this microprocessor will be able to serve you better. At 1.8V 3.3V, the CPU runs its I/O. The type DIGITAL SIGNAL PROCESSOR, OTHER belongs to uPs/uCs/Peripheral ICs. To find variants of the microprocessor, try searching with OMAPL137. Overall, there are 256 terminations. Using a 1.3V voltage supply, the microprocessor should turn on and run. 456MHz is the CPU's frequency. For information about 256 pins, please refer to the datasheet. An example of a Other Microprocessor ICs microprocessor can be found here. An external data bus width of 16 is available on this CPU. 256 pins are injected into the part body. Many applications make use of this CPU, which has Surface Mount mounted. A 1.32V core voltage is present on the CPU. The CPU microprocessor includes 3 UARTs (Universal Asynchro3us Receiver/Transmitter)
OMAPL137BZKB4 Features
ARM926EJ-S Core
OMAPL137BZKB4 Applications
There are a lot of Texas Instruments OMAPL137BZKB4 Microprocessor applications.
- Calculators
- Hand-held metering systems
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Guidance-GPS
- Safety -airbags, automatic braking system (ABS)
- Walkie talkies
- PDAs, game consoles
- Virtual reality VR robots
- DDC control
- Accu-check
