OMAPL137BZKBD4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | 256-BGA |
| Number of Pins | 256 |
| Operating Temperature | -40°C~90°C TJ |
| Packaging | Tray |
| Series | OMAP-L1x |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.3V |
| Terminal Pitch | 1mm |
| Frequency | 456MHz |
| Base Part Number | OMAPL137 |
| Pin Count | 256 |
| Voltage | 1.32V |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Core Processor | ARM926EJ-S |
| Address Bus Width | 13 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 16 |
| Format | FLOATING POINT |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 3 |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | SDRAM |
| USB | USB 1.1 + PHY (1), USB 2.0 + PHY (1) |
| Additional Interfaces | HPI, I2C, McASP, MMC/SD, SPI, UART |
| Co-Processors/DSP | Signal Processing; C674x, System Control; CP15 |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Display & Interface Controllers | LCD |
| Height Seated (Max) | 2.05mm |
| Length | 17mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OMAPL137BZKBD4 Overview
The embedded microprocessor ships overseas conveniently packed in 256-BGA. High reliability can be achieved by using the advanced packaging method Tray. This CPU has 1 Core 32-Bit cores and 1 Core 32-Bit bus widths. Understand the operating temperature around -40°C~90°C TJ. OMAP-L1x is its series number. A ARM926EJ-S processor powers this CPU. A total of SDRAM RAM controllers are used by this CPU. This microprocessor is equipped with an interface of HPI, I2C, McASP, MMC/SD, SPI, UART. I/O is run at 1.8V 3.3V on this CPU. This is a DIGITAL SIGNAL PROCESSOR, OTHER for the uPs/uCs/Peripheral ICs type. Search OMAPL137 for variants of the embedded microprocessor. A total of 256 terminations have been recorded. You should be able to turn on and run the embedded microprocessor with a voltage supply of 1.3V. A CPU operates at a frequency of 456MHz. For information about 256 pins, please refer to the datasheet. As a typical Other Microprocessor ICs, this cpu microprocessor has Other Microprocessor ICs display. With a 16 external data bus width, this CPU has a wide data bus. 256 pins are injected into the part body. There are many applications that use the CPU with Surface Mount mounted. 1.32V is the core voltage of the CPU. 3 UART (Universal Asynchro3us Receiver/Transmitter) channels are provided by this CPU microprocessor
OMAPL137BZKBD4 Features
ARM926EJ-S Core
OMAPL137BZKBD4 Applications
There are a lot of Texas Instruments OMAPL137BZKBD4 Microprocessor applications.
- Microwave ovens
- Removable disks
- Light sensing & controlling devices
- Automatic control
- Consumer electronics products
- Set-top boxes
- Fire detection & safety devices
- Playstation
- Nintendo
- Switches
