OMAPL137DZKB4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Package / Case | 256-BGA |
| Number of Pins | 256 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | OMAP-L1x |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.3V |
| Frequency | 456MHz |
| Base Part Number | OMAPL137 |
| Operating Supply Voltage | 1.32V |
| Interface | SPI, USB |
| Max Supply Voltage | 1.35V |
| Min Supply Voltage | 1.14V |
| Memory Size | 64kB |
| Oscillator Type | External |
| Number of I/O | 28 |
| RAM Size | 128kB |
| Memory Type | Cache, SRAM |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Core Processor | ARM926EJ-S |
| Data Bus Width | 16b |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 3 |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | SDRAM |
| USB | USB 1.1 + PHY (1), USB 2.0 + PHY (1) |
| Additional Interfaces | HPI, I2C, McASP, MMC/SD, SPI, UART |
| Number of Timers | 3 |
| Co-Processors/DSP | Signal Processing; C674x, System Control; CP15 |
| Number of Cores | 1 |
| Barrel Shifter | NO |
| Internal Bus Architecture | SINGLE |
| Display & Interface Controllers | LCD |
| Height | 2.05mm |
| Length | 17mm |
| Width | 17mm |
| Thickness | 1.36mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OMAPL137DZKB4 Overview
The embedded microprocessor has been packed in 256-BGA for convenient overseas shipping. High reliability can be achieved by using the advanced packaging method Tray. In the CPU, there are 1 Core 32-Bit cores and 1 Core 32-Bit bus width. Understand how the operating temperature around 0°C~90°C TJ is determined. In the series OMAP-L1x, it is found. With a core count of ARM926EJ-S, this CPU is multicore. A CPU with this architecture uses SDRAM RAM controllers. This microprocessor has HPI, I2C, McASP, MMC/SD, SPI, UART interfaces to serve you better. As far as I/O is concerned, this CPU runs at 1.8V 3.3V. In terms of uPs and uCs as well as peripheral ICs, this is a DIGITAL SIGNAL PROCESSOR, OTHER. OMAPL137 is a good way to search for variants of the microprocessor. Overall, there are 256 terminations. Turn on the cpu microprocessor and let it run with a 1.3V voltage supply. A 456MHz frequency is used by the CPU. 256 pin functions are described in the datasheets. A typical Other Microprocessor ICs embedded microprocessor. In order to transfer data, there is a bandwidth of 16b. 1 cores are present in this processor. Many applications make use of this CPU, which has Surface Mount mounted. The micro processor can function from 1.32V. In this case, the amount of RAM (Random-Access Memory) is set to 128kB. A voltage higher than 1.35V shouldn't be used in a normal situation. There should be 1.14V voltage applied to the CPU microprocessor below 1.14V. A CPU program transfers data by using 28 I/Os. There is 64kB memory on the CPU. There are 3 UART (Universal Asynchro3us Receiver/Transmitter) channels on this embedded microprocessor
OMAPL137DZKB4 Features
ARM926EJ-S Core
16b-Bit Data Bus Width
1-Core CPU
128kB RAM
28 I/Os
OMAPL137DZKB4 Applications
There are a lot of Texas Instruments OMAPL137DZKB4 Microprocessor applications.
- Smoke alarms
- Gas monitoring systems
- Measuring revolving objects
- Aerospace navigation systems
- Heart rate monitors
- Projector
- Medical instruments chromatographs
- Instrumentation and process control field
- Automobile
- Accu-check
