OMAPL137DZKBT3
| Parameters | |
|---|---|
| Min Supply Voltage | 1.14V |
| Memory Size | 32kB |
| RAM Size | 128kB |
| Memory Type | Cache, FLASH |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Core Processor | ARM926EJ-S |
| Data Bus Width | 16b |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 3 |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | SDRAM |
| USB | USB 1.1 + PHY (1), USB 2.0 + PHY (1) |
| Additional Interfaces | HPI, I2C, McASP, MMC/SD, SPI, UART |
| Number of Timers | 3 |
| Co-Processors/DSP | Signal Processing; C674x, System Control; CP15 |
| Number of Cores | 1 |
| Barrel Shifter | NO |
| Internal Bus Architecture | SINGLE |
| Display & Interface Controllers | LCD |
| Height | 2.05mm |
| Length | 17mm |
| Width | 17mm |
| Thickness | 1.36mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Package / Case | 256-BGA |
| Number of Pins | 256 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tray |
| Series | OMAP-L1x |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Frequency | 375MHz |
| Base Part Number | OMAPL137 |
| Interface | Ethernet, I2C, SPI, UART, USB |
| Max Supply Voltage | 1.32V |
OMAPL137DZKBT3 Overview
Due to its 256-BGA packaging, it is convenient to ship overseas. High reliability is provided by the advanced packaging method Tray. There are 1 Core 32-Bit cores per bus width on the CPU. Understand how the operating temperature around -40°C~125°C TJ is determined. This is a member of the OMAP-L1x series. ARM926EJ-S processors are embedded in this CPU. The CPU uses SDRAM RAM controllers. With its HPI, I2C, McASP, MMC/SD, SPI, UART interfaces, this microprocessor will be able to serve you better. The CPU runs at 1.8V 3.3V when it comes to I/O. I would rate this as a DIGITAL SIGNAL PROCESSOR, OTHER for the uPs/uCs/Peripheral ICs type. The microprocessor can be searched for with OMAPL137 if you are looking for variants. Total terminations are 256. When the voltage supply is 1.2V, the cpu microprocessor should be powered on and run. There is 375MHz frequency set for the CPU. For information about 256 pins, please refer to the datasheet. As a typical Other Microprocessor ICs, this cpu microprocessor has Other Microprocessor ICs display. The bandwidth required to transfer data is 16b. There are 1 cores in this CPU. In many applications, this CPU is mounted with a Surface Mount bus. It is designed with 0 RAM (Random-Access Memory). A voltage greater than 1.32V should not normally be applied to the embedded microprocessor. It is recommended to feed the CPU microprocessor with a voltage of 1.14V. A CPU has a memory size of 32kB bytes. With this CPU microprocessor, you get 3 UART (Universal Asynchro3us Receiver/Transmitter) channels.
OMAPL137DZKBT3 Features
ARM926EJ-S Core
16b-Bit Data Bus Width
1-Core CPU
128kB RAM
OMAPL137DZKBT3 Applications
There are a lot of Texas Instruments OMAPL137DZKBT3 Microprocessor applications.
- Digital set-top boxes
- Binding machines
- Smart instruments
- Firewalls
- Home appliances
- Air fryers
- DDC control
- Dishwashers
- Routers
- Day to day life field
