OMAPL138AZCEA3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | 361-LFBGA |
| Number of Pins | 361 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Series | OMAP-L1x |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 361 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Frequency | 300MHz |
| Base Part Number | OMAPL138 |
| Pin Count | 361 |
| Operating Supply Voltage | 1.2V |
| Voltage | 1.35V |
| Interface | I2C, Parallel, SPI, USB |
| Max Supply Voltage | 1.32V |
| Min Supply Voltage | 1.14V |
| RAM Size | 8kB |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Core Processor | ARM926EJ-S |
| Data Bus Width | 32b |
| Number of Timers/Counters | 3 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Voltage - I/O | 1.8V 3.3V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | SDRAM |
| USB | USB 1.1 + PHY (1), USB 2.0 + PHY (1) |
| Additional Interfaces | HPI, I2C, McASP, McBSP, MMC/SD, SPI, UART |
| Co-Processors/DSP | Signal Processing; C674x, System Control; CP15 |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Security Features | Boot Security, Cryptography |
| Display & Interface Controllers | LCD |
| SATA | SATA 3Gbps (1) |
| RoHS Status | ROHS3 Compliant |
OMAPL138AZCEA3 Overview
Shipping overseas is convenient thanks to the embedded microprocessor's packaging in 361-LFBGA. In order to provide high reliability, advanced packaging method Tray is used. 1 Core 32-Bit cores/Bus width are present in the CPU. Extended operating temperature around -40°C~105°C TJ. This is a member of the OMAP-L1x series. The CPU is cored by a processor with a number of 0 cores. The CPU contains SDRAM RAM controllers. This microprocessor is equipped with an interface of HPI, I2C, McASP, McBSP, MMC/SD, SPI, UART. 1.8V 3.3V is the I/O speed of this CPU. uPs/uCs/Peripheral ICs are a DIGITAL SIGNAL PROCESSOR, OTHER. Use OMAPL138 when searching for variants of the embedded microprocessor. To date, there have been 361 terminations. A 1.2V voltage supply should be used to turn on and run the cpu microprocessor. At 300MHz, the CPU operates. Datasheets for 361 pin functions can be found here. In order to transfer data, there is a bandwidth of 32b. The CPU microprocessor body is injected with 361 pins. This CPU is widely used in a variety of applications with its Surface Mount mounting. The micro processor can function from 1.2V. The CPU core voltage is 1.35V. In this case, the amount of RAM (Random-Access Memory) is set to 8kB. Microprocessors should never be supplied with voltages above 1.32V in normalcircumstances. The lowest voltage that should be applied to the micro processor is 1.14V. It is possible to tell how busy the CPU is by using 3 counters.
OMAPL138AZCEA3 Features
ARM926EJ-S Core
32b-Bit Data Bus Width
8kB RAM
OMAPL138AZCEA3 Applications
There are a lot of Texas Instruments OMAPL138AZCEA3 Microprocessor applications.
- Hand-held metering systems
- Computed Tomography (CT scan)
- Toasters
- Process control devices
- Radio
- Leakage current tester
- Petrochemical
- Digital TVs
- Smartphone
- PDAs, game consoles
