OMAPL138BZCEA3E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | 361-LFBGA |
| Number of Pins | 361 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Series | OMAP-L1x |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 361 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Other uPs/uCs/Peripheral ICs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1V |
| Terminal Pitch | 0.65mm |
| Frequency | 375MHz |
| Base Part Number | OMAPL138 |
| Pin Count | 361 |
| Voltage | 1.35V |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Core Processor | ARM926EJ-S |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 3 |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | SDRAM |
| USB | USB 1.1 + PHY (1), USB 2.0 + PHY (1) |
| Additional Interfaces | HPI, I2C, McASP, McBSP, MMC/SD, SPI, UART |
| Co-Processors/DSP | Signal Processing; C674x, System Control; CP15 |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Security Features | Boot Security, Cryptography |
| Display & Interface Controllers | LCD |
| SATA | SATA 3Gbps (1) |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OMAPL138BZCEA3E Overview
The microprocessor is conveniently packaged in 361-LFBGA, making it easy to ship internationally. Advanced packaging method Tray is used to provide high reliability. Cores/Bus width is 1 Core 32-Bit. It is important to understand the operating temperature around -40°C~105°C TJ. The cpu microprocessor belongs to the OMAP-L1x series. A ARM926EJ-S processor is present in this CPU. Memory controllers for this CPU are SDRAM. Microprocessors with HPI, I2C, McASP, McBSP, MMC/SD, SPI, UART interfaces are designed to serve users better. There is 1.8V 3.3V I/O running on this CPU. uPs/uCs/Peripheral ICs type is DIGITAL SIGNAL PROCESSOR, OTHER. Use OMAPL138 when searching for variants of the embedded microprocessor. There are 361 terminations totally. When the voltage supply is 1V, the cpu microprocessor should be powered on and run. The CPU operates at a frequency of 375MHz. To learn about the functions of the pins 361 please refer to their datasheets. A typical Other uPs/uCs/Peripheral ICs embedded microprocessor. A total of 361 pins are injected into the CPU microprocessor's body. As a result of its Surface Mount mounting, this CPU is widely used in a wide variety of applications. There is 1.35V voltage at the CPU core. 3 UART (Universal Asynchro3us Receiver/Transmitter) channels are provided with this CPU microprocessor
OMAPL138BZCEA3E Features
ARM926EJ-S Core
OMAPL138BZCEA3E Applications
There are a lot of Texas Instruments OMAPL138BZCEA3E Microprocessor applications.
- Computer/laptop
- Magnetic resonance imaging (MRI)
- Data acquisition and control
- Xbox
- DDC control
- Removable disks
- Robotic prosthetic limbs
- Hand-held metering systems
- Smart highways (navigation, traffic control, information monitoring and car service)
- Routers
