OMAPL138BZCEA3R
| Parameters | |
|---|---|
| Package / Case | 361-LFBGA |
| Surface Mount | YES |
| Number of Pins | 361 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMAP-L1x |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 361 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Other uPs/uCs/Peripheral ICs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.65mm |
| Frequency | 375MHz |
| Base Part Number | OMAPL138 |
| Pin Count | 361 |
| Operating Supply Voltage | 1.2V |
| Interface | I2C, Parallel, SPI, USB |
| Max Supply Voltage | 1.32V |
| Min Supply Voltage | 1.14V |
| RAM Size | 8kB |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Core Processor | ARM926EJ-S |
| Data Bus Width | 32b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 23 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Voltage - I/O | 1.8V 3.3V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | SDRAM |
| USB | USB 1.1 + PHY (1), USB 2.0 + PHY (1) |
| Additional Interfaces | HPI, I2C, McASP, McBSP, MMC/SD, SPI, UART |
| Co-Processors/DSP | Signal Processing; C674x, System Control; CP15 |
| Number of Cores | 1 |
| Barrel Shifter | NO |
| Internal Bus Architecture | SINGLE |
| Security Features | Boot Security, Cryptography |
| Display & Interface Controllers | LCD |
| SATA | SATA 3Gbps (1) |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OMAPL138BZCEA3R Overview
Since the microprocessor is packed in 361-LFBGA, shipping overseas is convenient. High reliability is achieved using advanced packaging method Tape & Reel (TR). Cores/Bus width of the CPU is 1 Core 32-Bit . Extended operating temperature around -40°C~105°C TJ. OMAP-L1x is its series number. ARM926EJ-S processors are embedded in this CPU. There are SDRAM RAM controllers used by this CPU. This microprocessor features interfaces HPI, I2C, McASP, McBSP, MMC/SD, SPI, UART. 1.8V 3.3V is the I/O speed of this CPU. In terms of uPs and uCs as well as peripheral ICs, this is a DIGITAL SIGNAL PROCESSOR, OTHER. Use OMAPL138 when searching for variants of the embedded microprocessor. The total number of terminations is 361. With a 1.2V voltage supply, the part should be turned on and run. The CPU operates at a frequency of 375MHz. You can refer to the datasheets for the functions of 361 pins. A typical Other uPs/uCs/Peripheral ICs embedded microprocessor. Generally, data transfer takes place at a rate of 32b bandwidth. Micro processor body consists of 361 pins. A CPU with 1 cores. In order to function, the embedded microprocessor must be set to 1.2V. In general, RAM (Random-Access Memory) is designed with a 8kB of 0MB. Users should not supply a microprocessor with more voltage than 1.32V under normalcircumstances. A voltage of 1.14V is recommended for feeding the embedded microprocessor. The CPU's idle time can be determined by 3 counters.
OMAPL138BZCEA3R Features
ARM926EJ-S Core
32b-Bit Data Bus Width
1-Core CPU
8kB RAM
OMAPL138BZCEA3R Applications
There are a lot of Texas Instruments OMAPL138BZCEA3R Microprocessor applications.
- Food and beverage
- Dryers
- Fax machines
- Smart highways (navigation, traffic control, information monitoring and car service)
- Toasters
- Aerospace navigation systems
- Washing machine
- Hand-held metering systems
- Air fryers
- Walkie talkies
