OMAPL138BZCED4E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | 361-LFBGA |
| Number of Pins | 361 |
| Operating Temperature | -40°C~90°C TJ |
| Packaging | Tray |
| Series | OMAP-L1x |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 361 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Other uPs/uCs/Peripheral ICs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1V |
| Terminal Pitch | 0.65mm |
| Frequency | 456MHz |
| Base Part Number | OMAPL138 |
| Pin Count | 361 |
| Operating Supply Voltage | 1.3V |
| Voltage | 1.35V |
| Interface | SPI |
| Min Supply Voltage | 1V |
| Number of I/O | 144 |
| RAM Size | 488kB |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Core Processor | ARM926EJ-S |
| Data Bus Width | 32b |
| Number of Timers/Counters | 4 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 3 |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | SDRAM |
| USB | USB 1.1 + PHY (1), USB 2.0 + PHY (1) |
| Additional Interfaces | HPI, I2C, McASP, McBSP, MMC/SD, SPI, UART |
| Co-Processors/DSP | Signal Processing; C674x, System Control; CP15 |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Security Features | Boot Security, Cryptography |
| Display & Interface Controllers | LCD |
| SATA | SATA 3Gbps (1) |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
OMAPL138BZCED4E Overview
The embedded microprocessor ships overseas conveniently packed in 361-LFBGA. Advanced packaging method Tray is used to provide high reliability. Cores/Bus width is 1 Core 32-Bit. Obtain a basic understanding of operating temperature around 0°C. The cpu microprocessor belongs to the OMAP-L1x series. Core-wise, this CPU has a ARM926EJ-S processor. A CPU with this architecture uses SDRAM RAM controllers. A HPI, I2C, McASP, McBSP, MMC/SD, SPI, UART interface has been added to this microprocessor in order to serve the user better. At 1.8V 3.3V, the CPU runs its I/O. As far as the uPs/uCs/Peripheral ICs type is concerned, this is a DIGITAL SIGNAL PROCESSOR, OTHER. Try searching for variants of the cpu microprocessor with OMAPL138. Total terminations are 361. When the voltage supply is 1V, the cpu microprocessor should be powered on and run. A 456MHz frequency is used by the CPU. To learn about the functions of the pins 361 please refer to their datasheets. A typical Other uPs/uCs/Peripheral ICs embedded microprocessor. In order to transfer data, there is a bandwidth of 32b. Injection of 361 pins into the body of the embedded microprocessor is carried out. There are many applications that use the CPU with Surface Mount mounted. As of 1.3V, the CPU microprocessor is capable of functioning. There is 1.35V voltage present in the CPU core. Random-Access Memory (RAM) is designed with an amount of 488kB KB. CPU microprocessors should be fed with 1V voltage. In CPU programs, data is transferred by 144 I/Os. A CPU's 4 counters indicate how busy it is. There are 3 UART (Universal Asynchro3us Receiver/Transmitter) channels on this embedded microprocessor
OMAPL138BZCED4E Features
ARM926EJ-S Core
32b-Bit Data Bus Width
488kB RAM
144 I/Os
OMAPL138BZCED4E Applications
There are a lot of Texas Instruments OMAPL138BZCED4E Microprocessor applications.
- Data acquisition and control
- Metering & measurement field
- Consumer electronics products
- DVD\DV\MP3 players
- Xbox
- Heart rate monitors
- Fax machines
- Fabric
- Radio
- Graphic terminals
