OMAPL138BZWT4
| Parameters | |
|---|---|
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Package / Case | 361-LFBGA |
| Number of Pins | 361 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | OMAP-L1x |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 361 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Other uPs/uCs/Peripheral ICs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1V |
| Terminal Pitch | 0.8mm |
| Frequency | 456MHz |
| Base Part Number | OMAPL138 |
| Pin Count | 361 |
| Voltage | 1.35V |
| Interface | Ethernet, MMC, SATA, SD, UART, USB |
| Max Supply Voltage | 1.35V |
| Min Supply Voltage | 1.25V |
| Memory Size | 32kB |
| RAM Size | 40kB |
| Memory Type | Cache, RAM, ROM |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Core Processor | ARM926EJ-S |
| Data Bus Width | 32b |
| Number of Timers/Counters | 4 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 3 |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | SDRAM |
| USB | USB 1.1 + PHY (1), USB 2.0 + PHY (1) |
| Additional Interfaces | HPI, I2C, McASP, McBSP, MMC/SD, SPI, UART |
| Co-Processors/DSP | Signal Processing; C674x, System Control; CP15 |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Security Features | Boot Security, Cryptography |
| Display & Interface Controllers | LCD |
| SATA | SATA 3Gbps (1) |
| Length | 16mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OMAPL138BZWT4 Overview
The embedded microprocessor ships overseas conveniently packed in 361-LFBGA. High reliability is achieved using advanced packaging method Tray. There are 1 Core 32-Bit cores/bus width on the CPU. Extended operating temperature around 0°C~90°C TJ. OMAP-L1x is its series number. A ARM926EJ-S processor is present in this CPU. Memory controllers for this CPU are SDRAM. With its HPI, I2C, McASP, McBSP, MMC/SD, SPI, UART interfaces, this microprocessor will be able to serve you better. I/O is run at 1.8V 3.3V on this CPU. It is a DIGITAL SIGNAL PROCESSOR, OTHER in terms of uPs/uCs/Peripheral ICs. If you are looking for variants of the cpu microprocessor, try search with OMAPL138. A total of 361 terminations have been recorded. Using a 1V voltage supply, the microprocessor should turn on and run. 456MHz is the CPU's frequency. To learn about the functions of the pins 361 please refer to their datasheets. A typical Other uPs/uCs/Peripheral ICs embedded microprocessor. The bandwidth required to transfer data is 32b. An injection of 361 pins is performed inside the body of the micro processor. This CPU is widely used in a variety of applications with its Surface Mount mounting. A CPU core voltage of 1.35V is present. In general, RAM (Random-Access Memory) is designed with a 40kB of 0MB. The embedded microprocessor should not be supplied with a voltage higher than 1.35V. It is recommended that the lowest voltage be fed to the micro processor is 1.25V. Its memory size is 32kB. The 4 counters help determine how busy the CPU is. The CPU microprocessor includes 3 UARTs (Universal Asynchro3us Receiver/Transmitter)
OMAPL138BZWT4 Features
ARM926EJ-S Core
32b-Bit Data Bus Width
40kB RAM
OMAPL138BZWT4 Applications
There are a lot of Texas Instruments OMAPL138BZWT4 Microprocessor applications.
- Oscilloscopes
- 8. Navigation control field
- Medical instruments chromatographs
- Playstation
- Answering machines
- Robotic prosthetic limbs
- Toys
- Binding machines
- Traditional industrial transformation
- DCS control intelligent sensor
