OMAPL138BZWTD4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | 361-LFBGA |
| Number of Pins | 361 |
| Operating Temperature | -40°C~90°C TJ |
| Packaging | Tube |
| Series | OMAP-L1x |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 361 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Other uPs/uCs/Peripheral ICs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1V |
| Terminal Pitch | 0.8mm |
| Frequency | 456MHz |
| Base Part Number | OMAPL138 |
| Pin Count | 361 |
| Voltage | 1.35V |
| Max Supply Voltage | 1.35V |
| Min Supply Voltage | 950mV |
| Number of I/O | 16 |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Core Processor | ARM926EJ-S |
| Data Bus Width | 32b |
| Number of Timers/Counters | 4 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 3 |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | SDRAM |
| USB | USB 1.1 + PHY (1), USB 2.0 + PHY (1) |
| Additional Interfaces | HPI, I2C, McASP, McBSP, MMC/SD, SPI, UART |
| Co-Processors/DSP | Signal Processing; C674x, System Control; CP15 |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Security Features | Boot Security, Cryptography |
| Display & Interface Controllers | LCD |
| SATA | SATA 3Gbps (1) |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OMAPL138BZWTD4 Overview
The embedded microprocessor has been packed in 361-LFBGA for convenient overseas shipping. The packaging method Tube provides high reliability. There are 1 Core 32-Bit cores per bus width on the CPU. Understand how the operating temperature around -40°C~90°C TJ is determined. It comes from the OMAP-L1x series. The CPU is cored by a processor with a number of 0 cores. This CPU uses SDRAM RAM controllers. This microprocessor features HPI, I2C, McASP, McBSP, MMC/SD, SPI, UART interfaces to better serve its users. This CPU runs I/O at 1.8V 3.3V. In terms of uPs and uCs as well as peripheral ICs, this is a DIGITAL SIGNAL PROCESSOR, OTHER. You can search for variants of a microprocessor with OMAPL138. As a whole, there are 361 terminations. You should be able to turn on and run the embedded microprocessor with a voltage supply of 1V. The CPU operates at a frequency of 456MHz. To learn about the functions of the pins 361 please refer to their datasheets. An example of a Other uPs/uCs/Peripheral ICs embedded microprocessor. The bandwidth required to transfer data is 32b. Injecting pins into the embedded microprocessor body results in 361 pins. This CPU is widely used in many applications because of its Surface Mount mount. A 1.35V core voltage is present on the CPU. Microprocessors should never be supplied with voltages above 1.35V in normalcircumstances. CPU microprocessors should be fed with 950mV voltage. Data is transferred through 16 I/O ports by CPU programs. An indication of CPU load is provided by 4 counters. 3 UART (Universal Asynchro3us Receiver/Transmitter) channels are provided by this CPU microprocessor
OMAPL138BZWTD4 Features
ARM926EJ-S Core
32b-Bit Data Bus Width
16 I/Os
OMAPL138BZWTD4 Applications
There are a lot of Texas Instruments OMAPL138BZWTD4 Microprocessor applications.
- Automatic staplers
- Gas monitoring systems
- Equipment control
- Removable disks
- Set-top boxes
- Food and beverage
- Kindle
- Guidance-GPS
- 8. Navigation control field
- Firewalls
