OMAPL138EZCEA3
| Parameters | |
|---|---|
| SATA | SATA 3Gbps (1) |
| Height | 1.3mm |
| Length | 13mm |
| Width | 13mm |
| Thickness | 890μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Package / Case | 361-LFBGA |
| Surface Mount | YES |
| Number of Pins | 361 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Series | OMAP-L1x |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 361 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Capacitance | 3pF |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 375MHz |
| Base Part Number | OMAPL138 |
| Pin Count | 361 |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR CIRCUIT |
| Core Processor | ARM926EJ-S |
| Core Architecture | ARM |
| Speed Grade | 375 MHz |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 3 |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | SDRAM |
| USB | USB 1.1 + PHY (1), USB 2.0 + PHY (1) |
| Additional Interfaces | HPI, I2C, McASP, McBSP, MMC/SD, SPI, UART |
| Co-Processors/DSP | Signal Processing; C674x, System Control; CP15 |
| Number of Cores | 1 |
| Bus Compatibility | I2C; SPI; UART; USB |
| Security Features | Boot Security, Cryptography |
| Display & Interface Controllers | LCD |
OMAPL138EZCEA3 Overview
The microprocessor is convenient for international shipping since it is packaged in 361-LFBGA. High reliability can be achieved by using the advanced packaging method Tray. 1 Core 32-Bit cores/Bus width are present in the CPU. It is important to understand the operating temperature around -40°C~105°C TJ. In the series OMAP-L1x, it is found. This CPU is cored with a ARM926EJ-S processor. A CPU with this architecture uses SDRAM RAM controllers. Featuring HPI, I2C, McASP, McBSP, MMC/SD, SPI, UART interfaces, this microprocessor can better serve you. 1.8V 3.3V is the I/O speed of this CPU. In terms of uPs and uCs as well as peripheral ICs, this is a MICROPROCESSOR CIRCUIT. Try searching for variants of the cpu microprocessor with OMAPL138. There are 361 terminations totally. The microprocessor should be turned on and run with a voltage supply of 1.3V volts. CPUs operate at 375MHz Hz. Please refer to the datasheets for 361 pins functions. Injection of 361 pins into the body of the embedded microprocessor is carried out. There are 1 cores in this CPU. With this CPU microprocessor, you get 3 UART (Universal Asynchro3us Receiver/Transmitter) channels.
OMAPL138EZCEA3 Features
ARM926EJ-S Core
1-Core CPU
OMAPL138EZCEA3 Applications
There are a lot of Texas Instruments OMAPL138EZCEA3 Microprocessor applications.
- Wastewater treatment
- Paper shredders
- Day to day life field
- Current meter
- Temperature sensing and controlling devices
- 8. Navigation control field
- Ipod
- Process control devices
- DCS control intelligent sensor
- Mobile computers
