OP07CPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | OP07 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 4mA |
| Nominal Supply Current | 2.7mA |
| Quiescent Current | 4mA |
| Slew Rate | 0.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 126 dB |
| Current - Input Bias | 1.8nA |
| Max Input Voltage | 13.5V |
| Voltage - Supply, Single/Dual (±) | ±3V~18V |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 75μV |
| Bandwidth | 600 kHz |
| Gain Bandwidth Product | 600 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 600 kHz |
| Voltage Gain | 112.04dB |
| Average Bias Current-Max (IIB) | 0.009μA |
| Power Supply Rejection Ratio (PSRR) | 108dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 22V |
| Voltage - Input Offset | 60μV |
| Bias Current-Max (IIB) @25C | 0.007μA |
| Dual Supply Voltage | 15V |
| Neg Supply Voltage-Max (Vsup) | -22V |
| Input Voltage Noise Density | 10.5nV/sqrt Hz |
| Height | 3.43mm |
| Length | 9.27mm |
| Width | 7.24mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP07CPZ Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. Op amps are General Purpose types of amplifier on the chip. Instrumentation amplifier is delivered in a Tube case. In recent months, the number of terminations has approached 8. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 15V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. It has 8 pins that make up the linear amplifier. There is an input offset voltage of 75μV for this buffer op amp. This electronic part is best mounted with type Through Hole. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Operational amplifier can operate supply current at 4mA. The voltage gain should stay at 112.04dB. Instrumentation amplifier has 1 channels on it. There is an 4mA quiescent current running through op amp ic.
OP07CPZ Features
8 Pins
supply voltage of 15V
112.04dB voltage gain
OP07CPZ Applications
There are a lot of Analog Devices Inc. OP07CPZ Instrumentational OP Amps applications.
Broadcasting
Thermocouples
Fission chambers
Communication
Wireless base stations
Oscilloscopes
Video conversion and routing
Automation control systems
Tablets
Subtraction operation circuits
