OP07DNZ
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | OP07 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 1.3mA |
| Quiescent Current | 1.3mA |
| Slew Rate | 0.2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 140 dB |
| Current - Input Bias | 200pA |
| Voltage - Supply, Single/Dual (±) | ±4V~18V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 150μV |
| Bandwidth | 600 kHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 600 kHz |
| Voltage Gain | 140dB |
| Power Supply Rejection Ratio (PSRR) | 130dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 45μV |
| Input Voltage Noise Density | 10nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
OP07DNZ Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. The instrumentation amplifier in this picture is of the General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. In recent months, the number of terminations has approached 8. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are available on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 150μV. The mounting type that is recommended for this electrical part is Through Hole. With regard to operating temperature, this op amp functions well at -40°C~125°C. Using an 1.3mA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain. 1 channels are available on the instrumentation amplifier. Buffer amplifier has a quiescent current of 1.3mA.
OP07DNZ Features
8 Pins
supply voltage of 5V
140dB voltage gain
OP07DNZ Applications
There are a lot of Analog Devices Inc. OP07DNZ Instrumentational OP Amps applications.
- Displayers for aircraft and air transportation control systems
- Navigation
- Semiconductor detectors
- Strain gauges
- Computer workstations
- Commercial audio systems
- Non-polarized electrodes
- ECG equipment
- High speed sample
- Blood pressure sensors
