OP07DRZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP07 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 1.3mA |
| Nominal Supply Current | 1.1mA |
| Output Current | 15mA |
| Quiescent Current | 1.3mA |
| Slew Rate | 0.2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 140 dB |
| Current - Input Bias | 200pA |
| Max Input Voltage | 13.5V |
| Voltage - Supply, Single/Dual (±) | ±4V~18V |
| Output Current per Channel | 15mA |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 150μV |
| Bandwidth | 600 kHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 600 kHz |
| Voltage Gain | 140dB |
| Power Supply Rejection Ratio (PSRR) | 130dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 45μV |
| Dual Supply Voltage | 15V |
| Input Voltage Noise Density | 10nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP07DRZ Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. General Purpose-type instrumentation amplifiers are used in this application. A Tube case is used to deliver the buffer op amp. It is estimated that there will be at least 8 terminations this year. Linear amplifier has a total of 8 pins. It is important to remember that this op amp should be operated at a voltage of 5V volts. This particular linear amplifier is a type of Operational Amplifier device, to be precise. Linear amplifier includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 150μV. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . This op amp can operate from a supply current at 1.3mA. There should be no change in the voltage gain. The op amp ic has 1 channels on it. There is a quiescent current of 1.3mA in this operational amplifier circuit.
OP07DRZ Features
8 Pins
supply voltage of 5V
140dB voltage gain
OP07DRZ Applications
There are a lot of Analog Devices Inc. OP07DRZ Instrumentational OP Amps applications.
- High speed sample
- Wireless base stations
- Navigation
- Measurements of Wheatstone bridge
- pH (acidity)
- Image computer boards
- Mobile phone
- Signal amplification
- Oscilloscopes
- Industrial control system
