OP07DRZ-REEL7
| Parameters | |
|---|---|
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP07 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 1.3mA |
| Nominal Supply Current | 1.1mA |
| Output Current | 15mA |
| Quiescent Current | 1.3mA |
| Min Input Voltage | 4V |
| Slew Rate | 0.2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 140 dB |
| Current - Input Bias | 200pA |
| Max Input Voltage | 13.5V |
| Voltage - Supply, Single/Dual (±) | ±4V~18V |
| Output Current per Channel | 15mA |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 150μV |
| Gain Bandwidth Product | 600kHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 600 kHz |
| Voltage Gain | 140dB |
| Power Supply Rejection Ratio (PSRR) | 130dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 45μV |
| Max Frequency | 1kHz |
| Dual Supply Voltage | 15V |
| Input Voltage Noise Density | 10nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
OP07DRZ-REEL7 Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. An op amp of this type is a General Purpose-type. The op amp is delivered to you in a Tape & Reel (TR) case. We are approaching the 8h termination of the year. The total number of pins on linear amplifier is 8. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The buffer op amp includes 8 pins. In terms of input offset voltage, operational amplifier rates 150μV. Surface Mount is the recommended mounting type for this linear amplifier. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 1.3mA supply current, this operational amplifier ics can be operated. Op amp is a member of the 140dB's 140dB family. Op amp ic has 1 channels. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. Linear amplifier has a quiescent current of 1.3mA.
OP07DRZ-REEL7 Features
8 Pins
supply voltage of 5V
140dB voltage gain
OP07DRZ-REEL7 Applications
There are a lot of Analog Devices Inc. OP07DRZ-REEL7 Instrumentational OP Amps applications.
- Power transmission
- Automation control systems
- ECG equipment
- Television broadcasting equipment
- Mobile phone
- Division circuits
- Integrator circuits
- Differentiator circuits
- Industrial applications including automation
- Industrial control system
