OP113ESZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP113 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 3mA |
| Quiescent Current | 3mA |
| Slew Rate | 1.2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 96 dB |
| Current - Input Bias | 240nA |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 75μV |
| Bandwidth | 3.4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 3400 kHz |
| Voltage Gain | 126.02dB |
| Average Bias Current-Max (IIB) | 0.7μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Settling Time | 9 μs |
| Bias Current-Max (IIB) @25C | 0.65μA |
| Dual Supply Voltage | 15V |
| Input Voltage Noise Density | 9nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP113ESZ Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. An op amp of this type is a General Purpose-type. In the case of Tube cases, linear amplifier will be delivered. There have been a total of 8 terminations over the past year. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 75μV. Surface Mount is the recommended mounting type of operational amplifiers. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 3mA and 10 . It is recommended to keep the voltage gain at 126.02dB at all times. As far as the device is concerned, buffer amplifier has 1 channels. The operating supply voltage of the buffer op amp is rated at 5V. There is an 3mA quiescent current in linear amplifier.
OP113ESZ Features
8 Pins
supply voltage of 15V
126.02dB voltage gain
OP113ESZ Applications
There are a lot of Analog Devices Inc. OP113ESZ Instrumentational OP Amps applications.
- Integrator circuits
- Video conversion and routing
- Cinema or auditorium audio system
- Portable docking station
- High/low-pass filter circuit
- Displayers for aircraft and air transportation control systems
- Blood pressure sensors
- Large motor controllers
- Vehicle electronics
- Instrumentation
