OP177FSZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP177 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 2mA |
| Nominal Supply Current | 1.6mA |
| Power Dissipation | 500mW |
| Max Supply Current | 2mA |
| Quiescent Current | 2mA |
| Slew Rate | 0.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 140 dB |
| Current - Input Bias | 1.2nA |
| Max Input Voltage | 14V |
| Voltage - Supply, Single/Dual (±) | 6V~36V ±3V~18V |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 25μV |
| Bandwidth | 600 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 600 kHz |
| Voltage Gain | 141.58dB |
| Average Bias Current-Max (IIB) | 0.004μA |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 22V |
| Voltage - Input Offset | 10μV |
| Bias Current-Max (IIB) @25C | 0.002μA |
| Dual Supply Voltage | 15V |
| Neg Supply Voltage-Max (Vsup) | -22V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP177FSZ Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. A Tube case is used for delivering the op amp. A total of 8 terminations have been reported in the past few weeks. Linear amplifier has a total of 8 pins. This linear amplifier should be powered by an 15V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 8 pins are included on the operational amplifiers. Op amp ic rates 25μV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Using an 2mA supply current, this operational amplifier ics can be operated. Keeping the voltage gain at 141.58dB is the best course of action. As far as the device is concerned, buffer amplifier has 1 channels. Linear amplifier has a quiescent current of 2mA.
OP177FSZ Features
8 Pins
supply voltage of 15V
141.58dB voltage gain
OP177FSZ Applications
There are a lot of Analog Devices Inc. OP177FSZ Instrumentational OP Amps applications.
- ECG equipment
- Fission chambers
- Differentiator circuits
- Band-pass filter
- Blood pressure sensors
- Measurements of Wheatstone bridge
- Integrator circuits
- Image computer boards
- Non-polarized electrodes
- PDA
