OP177FSZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP177 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 2mA |
| Power Dissipation | 500mW |
| Quiescent Current | 2mA |
| Supply Current-Max | 2.5mA |
| Slew Rate | 0.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 140 dB |
| Current - Input Bias | 1.2nA |
| Voltage - Supply, Single/Dual (±) | 6V~36V ±3V~18V |
| Input Offset Voltage (Vos) | 25μV |
| Bandwidth | 600 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 600 kHz |
| Voltage Gain | 141.58dB |
| Average Bias Current-Max (IIB) | 0.004μA |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 22V |
| Voltage - Input Offset | 10μV |
| Bias Current-Max (IIB) @25C | 0.002μA |
| Neg Supply Voltage-Max (Vsup) | -22V |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP177FSZ-REEL7 Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. In this case, there are 8 pins on the board. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. There are 8 pins on this chip. Op amp ic rates 25μV for input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, this op amp functions well at -40°C~85°C. You can run this op amp ic on 2mA . It is a member of the 141.58dB's 141.58dB family. Buffer op amp is equipped with 1 channels on the device. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. There is an 2mA quiescent current in linear amplifier.
OP177FSZ-REEL7 Features
8 Pins
supply voltage of 15V
141.58dB voltage gain
OP177FSZ-REEL7 Applications
There are a lot of Analog Devices Inc. OP177FSZ-REEL7 Instrumentational OP Amps applications.
- High/low-pass filter circuit
- Television
- Ultrasound transducers
- Commercial audio systems
- Biopotential
- ECG equipment
- pH (acidity)
- Fast A/D and D/A converters
- Active probe
- Medical imaging
