OP177GS
| Parameters | |
|---|---|
| Quiescent Current | 2mA |
| Slew Rate | 0.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 140 dB |
| Current - Input Bias | 1.2nA |
| Max Input Voltage | 14V |
| Voltage - Supply, Single/Dual (±) | 6V~36V ±3V~18V |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 25μV |
| Gain Bandwidth Product | 600kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 600 kHz |
| Voltage Gain | 135.56dB |
| Average Bias Current-Max (IIB) | 0.006μA |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 22V |
| Voltage - Input Offset | 20μV |
| Dual Supply Voltage | 15V |
| Neg Supply Voltage-Max (Vsup) | -22V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | OP177 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 2mA |
| Nominal Supply Current | 1.6mA |
| Power Dissipation | 500mW |
| Max Supply Current | 2mA |
OP177GS Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. There are two types of operational amplifiers in this circuit. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations approaches 8. In this case, there are 8 pins on the board. It is important to remember that this op amp should be operated at a voltage of 15V volts. Instrumentation amplifier is a part of Operational Amplifier. It has 8 pins that make up the linear amplifier. Regarding input offset voltage, op amp rates 25μV. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, op amp ranges -40°C~85°C. It is possible to operate this buffer amplifier from a supply current of 2mA . Maintain 135.56dB as the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. Buffer amplifier has a quiescent current of 2mA.
OP177GS Features
8 Pins
supply voltage of 15V
135.56dB voltage gain
OP177GS Applications
There are a lot of Analog Devices Inc. OP177GS Instrumentational OP Amps applications.
- MP3
- Comparator
- High speed sample
- Switching amplifier
- Power transmission
- Cinema or auditorium audio system
- High input resistance broadband
- Power control
- Band-pass filter
- ECG equipment
