OP177GSZ
| Parameters | |
|---|---|
| Common Mode Rejection Ratio | 140 dB |
| Current - Input Bias | 1.2nA |
| Max Input Voltage | 14V |
| Voltage - Supply, Single/Dual (±) | 6V~36V ±3V~18V |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 25μV |
| Bandwidth | 600 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 600 kHz |
| Voltage Gain | 135.56dB |
| Average Bias Current-Max (IIB) | 0.006μA |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 22V |
| Voltage - Input Offset | 20μV |
| Dual Supply Voltage | 15V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP177 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Operating Supply Current | 2mA |
| Nominal Supply Current | 1.6mA |
| Power Dissipation | 500mW |
| Quiescent Current | 2mA |
| Slew Rate | 0.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
OP177GSZ Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a General Purpose-type. In the case of Tube cases, linear amplifier will be delivered. During the past two weeks, there have been close to 8 terminations. It consists of a total of 8 pins in total. Please take in mind that this instrumentation amplifier should be run at 15V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 8 pins are included on the operational amplifiers. Op amp rates 25μV as input offset voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. The buffer amplifier is capable of operating from a supply current of 2mA . Maintain 135.56dB as the voltage gain. Buffer op amp is equipped with 1 channels on the device. The operating supply voltage of the buffer op amp is rated at 15V. There is a quiescent current of 2mA in this operational amplifier circuit.
OP177GSZ Features
8 Pins
supply voltage of 15V
135.56dB voltage gain
OP177GSZ Applications
There are a lot of Analog Devices Inc. OP177GSZ Instrumentational OP Amps applications.
- Computer workstations
- Medical imaging
- Medical instruments
- Non-polarized electrodes
- Signal amplification
- Automatic control
- Precision measurement
- single/dual op amp sum and difference circuits
- Power control
- Wireless base stations
