OP177GSZ-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP177 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 2mA |
| Nominal Supply Current | 1.6mA |
| Power Dissipation | 500mW |
| Quiescent Current | 2mA |
| Slew Rate | 0.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 140 dB |
| Current - Input Bias | 1.2nA |
| Max Input Voltage | 14V |
| Voltage - Supply, Single/Dual (±) | 6V~36V ±3V~18V |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 25μV |
| Gain Bandwidth Product | 600kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 600 kHz |
| Voltage Gain | 135.56dB |
| Average Bias Current-Max (IIB) | 0.006μA |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 22V |
| Voltage - Input Offset | 20μV |
| Dual Supply Voltage | 15V |
| Neg Supply Voltage-Max (Vsup) | -22V |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
OP177GSZ-REEL Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. Op amps are General Purpose types of amplifier on the chip. The op amp is delivered to you in a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. Linear amplifier has a total of 8 pins. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. To be specific, this instrumentation amplifier is a type of Operational Amplifier. A total of 8 pins are present on the instrumentation amplifier. The input offset voltage is 25μV. This electronic part is best mounted with type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. As long as the supply current of the chip does not exceed 2mA, this op amp ic can operate. You should keep the voltage gain at 135.56dB for the time being. On the buffer amps, there are 1 channels that can be used. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. As a result, linear amplifier's quiescent current is 2mA.
OP177GSZ-REEL Features
8 Pins
supply voltage of 15V
135.56dB voltage gain
OP177GSZ-REEL Applications
There are a lot of Analog Devices Inc. OP177GSZ-REEL Instrumentational OP Amps applications.
- Semiconductor detectors
- Car stereo
- Measurements of Wheatstone bridge
- Fission chambers
- Switching amplifier
- Active probe
- Precision measurement
- Cinema or auditorium audio system
- Video conversion and routing
- Radar
