Parameters |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Technology |
BIPOLAR |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
OP184 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Number of Channels |
1 |
Operating Supply Current |
2mA |
Nominal Supply Current |
2.25mA |
Output Current |
10mA |
Max Supply Current |
1.45mA |
Quiescent Current |
2mA |
Slew Rate |
4V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
90 dB |
Current - Input Bias |
80nA |
Max Input Voltage |
18V |
Voltage - Supply, Single/Dual (±) |
3V~36V ±1.5V~18V |
Output Current per Channel |
10mA |
Supply Type |
Dual, Single |
Input Offset Voltage (Vos) |
100μV |
Bandwidth |
4MHz |
Gain Bandwidth Product |
4.25MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Unity Gain BW-Nom |
4250 kHz |
Voltage Gain |
107.6dB |
Average Bias Current-Max (IIB) |
0.575μA |
Power Supply Rejection Ratio (PSRR) |
90dB |
Low-Offset |
YES |
Frequency Compensation |
YES |
Settling Time |
4 μs |
Bias Current-Max (IIB) @25C |
0.3μA |
Dual Supply Voltage |
15V |
Input Voltage Noise Density |
3.9nV/sqrt Hz |
Height |
1.5mm |
Length |
5mm |
Width |
4mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
OP184ES Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be at least 8 terminations this year. Buffer amplifier has a total of 8 pins. Please take in mind that op amp should be run at 15V. Instrumentation amplifier is a part of Operational Amplifier. A total of 8 pins are present on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 100μV. This electrical part should be mounted using type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. Using a supply current of 2mA , this buffer op amp will be able to operate. Voltage gain should remain at 107.6dB. There are a total of 1 channels available on the op amps. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The quiescent current is 2mA.
OP184ES Features
8 Pins
supply voltage of 15V
107.6dB voltage gain
Output Type: Rail-to-Rail
OP184ES Applications
There are a lot of Analog Devices Inc. OP184ES Instrumentational OP Amps applications.
- Active probe
- Instrumentation
- Automotive sensors
- Micro signal measurement
- Medical imaging
- Polarized electrodes
- Television
- Automatic control
- Radar
- Industrial control system