OP184FS

1 Channels 10mA per Channel 80nA 90 dB Instrumentational OP Amps 0.575μA 3V~36V ±1.5V~18V OP184 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-OP184FS
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 433
Description: 1 Channels 10mA per Channel 80nA 90 dB Instrumentational OP Amps 0.575μA 3V~36V ±1.5V~18V OP184 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Technology	BIPOLAR
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	OP184
Pin Count	8
Output Type	Rail-to-Rail
Number of Channels	1
Operating Supply Current	2.25mA
Nominal Supply Current	2.25mA
Output Current	10mA
Quiescent Current	2mA
Slew Rate	4V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	90 dB
Current - Input Bias	80nA
Voltage - Supply, Single/Dual (±)	3V~36V ±1.5V~18V
Output Current per Channel	10mA
Supply Type	Dual, Single
Input Offset Voltage (Vos)	175μV
Gain Bandwidth Product	4.25MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Unity Gain BW-Nom	4250 kHz
Voltage Gain	107.6dB
Average Bias Current-Max (IIB)	0.575μA
Power Supply Rejection Ratio (PSRR)	76dB
Low-Offset	YES
Frequency Compensation	YES
Bias Current-Max (IIB) @25C	0.3μA
Dual Supply Voltage	15V
Input Voltage Noise Density	3.9nV/sqrt Hz
Length	4.9mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

OP184FS Overview

There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. Buffer amps of this type are called General Purpose-types. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations is approaching the 8 mark. The pins on this board total to 8 in total. Please take in mind that op amp should be run at 15V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. There are 8 pins on this chip. As far as the input offset voltage is concerned, linear amplifier rates at 175μV. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. You can run this op amp ic on 2.25mA . Keeping the voltage gain at 107.6dB is the best course of action. Instrumentation amplifier has 1 channels on it. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. As a result, linear amplifier's quiescent current is 2mA.