OP184FS-REEL7

1 Channels 10mA per Channel 80nA 90 dB Instrumentational OP Amps 0.575μA 3V~36V ±1.5V~18V OP184 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-OP184FS-REEL7
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 922
Description: 1 Channels 10mA per Channel 80nA 90 dB Instrumentational OP Amps 0.575μA 3V~36V ±1.5V~18V OP184 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TAPE AND REEL
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	OP184
Pin Count	8
Output Type	Rail-to-Rail
Number of Channels	1
Operating Supply Current	2.25mA
Quiescent Current	2mA
Slew Rate	4V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	90 dB
Current - Input Bias	80nA
Voltage - Supply, Single/Dual (±)	3V~36V ±1.5V~18V
Output Current per Channel	10mA
Input Offset Voltage (Vos)	175μV
Gain Bandwidth Product	4.25MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Unity Gain BW-Nom	4250 kHz
Voltage Gain	107.6dB
Average Bias Current-Max (IIB)	0.575μA
Power Supply Rejection Ratio (PSRR)	76dB
Low-Offset	YES
Frequency Compensation	YES
Bias Current-Max (IIB) @25C	0.3μA
Input Voltage Noise Density	3.9nV/sqrt Hz
Length	4.9mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

OP184FS-REEL7 Overview

In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. The instrumentation amplifier in this picture is of the General Purpose-type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. The total number of pins on linear amplifier is 8. Please take in mind that this instrumentation amplifier should be run at 15V. Instrumentation amplifier is a part of Operational Amplifier. It has 8 pins that make up the linear amplifier. Regarding input offset voltage, op amp rates 175μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Using a supply current of 2.25mA , this buffer op amp will be able to operate. There should be no change in the voltage gain at 107.6dB. As far as the device is concerned, buffer amplifier has 1 channels. On the output type, there are Rail-to-Rail different types of op amps. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. As a result, linear amplifier's quiescent current is 2mA.