OP213ESZ
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP213 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Operating Supply Current | 6mA |
| Nominal Supply Current | 1.6mA |
| Output Current | 40mA |
| Max Supply Current | 2.7mA |
| Quiescent Current | 3mA |
| Slew Rate | 1.2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 96 dB |
| Current - Input Bias | 240nA |
| Max Input Voltage | 14V |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 40mA |
| Supply Type | Dual, Single |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 3.4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 3400 kHz |
| Voltage Gain | 126.02dB |
| Average Bias Current-Max (IIB) | 0.7μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Settling Time | 9 μs |
| Bias Current-Max (IIB) @25C | 0.65μA |
| Dual Supply Voltage | 15V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
OP213ESZ Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. An op amp of this type is a General Purpose-type. Linear amplifier is delivered in a Tube case. We are approaching the 8h termination of the year. In total, there are 8 pins on this op amp ic. I would like to remind you that this buffer op amp should be powered by an 15V battery. It should be noted that this op amp is a type of Operational Amplifier device. An 8-pin op amp ic is included in the package. Op amp ic rates 100μV for input offset voltage. This electronic part is best mounted with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureA supply current of 6mA can be used to operate this linear amplifier. The voltage gain should stay at 126.02dB. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. Op amp has total of 2 elements. The operating supply voltage of instrumentation amplifier is rated 5V voltage. Linear amplifier has a quiescent current of 3mA.
OP213ESZ Features
8 Pins
supply voltage of 15V
126.02dB voltage gain
Output Type: Rail-to-Rail
OP213ESZ Applications
There are a lot of Analog Devices Inc. OP213ESZ Instrumentational OP Amps applications.
- Television broadcasting equipment
- Navigation
- Car stereo
- Logarithmic operation circuits
- Automatic control
- Radiation thermometry transducers
- Portable docking station
- Signal operation
- Mobile phone
- MP3
