banner_page

OP213FSZ

2 Channels 40mA per Channel 240nA 96 dB Instrumentational OP Amps 0.7μA 5V 4V~36V ±2V~18V OP213 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-OP213FSZ
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 655
  • Description: 2 Channels 40mA per Channel 240nA 96 dB Instrumentational OP Amps 0.7μA 5V 4V~36V ±2V~18V OP213 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 1 month ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Subcategory Operational Amplifier
Technology BIPOLAR
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 15V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number OP213
Pin Count 8
Output Type Rail-to-Rail
Operating Supply Voltage 5V
Number of Channels 2
Operating Supply Current 6mA
Nominal Supply Current 3mA
Output Current 40mA
Max Supply Current 2.7mA
Quiescent Current 3mA
Slew Rate 1.2V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 96 dB
Current - Input Bias 240nA
Max Input Voltage 14V
Voltage - Supply, Single/Dual (±) 4V~36V ±2V~18V
Output Current per Channel 40mA
Supply Type Dual, Single
Input Offset Voltage (Vos) 100μV
Bandwidth 3.4MHz
Neg Supply Voltage-Nom (Vsup) -15V
Unity Gain BW-Nom 3400 kHz
Voltage Gain 126.02dB
Average Bias Current-Max (IIB) 0.7μA
Power Supply Rejection Ratio (PSRR) 100dB
Low-Offset YES
Frequency Compensation YES
Voltage - Input Offset 250μV
Settling Time 9 μs
Bias Current-Max (IIB) @25C 0.65μA
Dual Supply Voltage 15V
Height 1.5mm
Length 5mm
Width 4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

OP213FSZ Overview


The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. General Purpose-type instrumentation amplifiers are used in this application. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. In recent months, the number of terminations has approached 8. Buffer amplifier has a total of 8 pins on it. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. An 8-pin op amp ic is included in the package. The input offset voltage is 100μV. For this electrical component, Surface Mount is the recommended mounting type. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. It is possible to operate this buffer amplifier from a supply current of 6mA . Keeping the voltage gain at 126.02dB is the best course of action. There are 2 channels on the operational amplifiers. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 5V. 3mA quiescent currents are flowing through buffer op amp.

OP213FSZ Features


8 Pins
supply voltage of 15V
126.02dB voltage gain
Output Type: Rail-to-Rail

OP213FSZ Applications


There are a lot of Analog Devices Inc. OP213FSZ Instrumentational OP Amps applications.

  • Cinema or auditorium audio system
  • Strain gauges
  • MP3
  • E-book readers
  • Power transmission
  • Scintillation detectors
  • Computer workstations
  • Navigation
  • Video data acquisition
  • Differentiator circuits

Write a review

Note: HTML is not translated!
    Bad           Good