OP213FSZ-REEL7
| Parameters | |
|---|---|
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP213 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 2 |
| Operating Supply Current | 6mA |
| Nominal Supply Current | 2.7mA |
| Max Supply Current | 2.7mA |
| Quiescent Current | 3mA |
| Slew Rate | 1.2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 96 dB |
| Current - Input Bias | 240nA |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 40mA |
| Supply Type | Dual, Single |
| Input Offset Voltage (Vos) | 100μV |
| Gain Bandwidth Product | 3.4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 3400 kHz |
| Voltage Gain | 126.02dB |
| Average Bias Current-Max (IIB) | 0.7μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 250μV |
| Settling Time | 9 μs |
| Bias Current-Max (IIB) @25C | 0.65μA |
| Dual Supply Voltage | 15V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
OP213FSZ-REEL7 Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. General Purpose-type instrumentation amplifiers are used in this application. A Tape & Reel (TR) case is used for delivering the op amp. A total of 8 terminations have been reported in the past few weeks. In total, there are 8 pins on this op amp ic. Please take in mind that this instrumentation amplifier should be run at 15V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 100μV voltage. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 6mA and 10 . There should be no change in the voltage gain. 2 channels are available on the instrumentation amplifier. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The operating supply voltage of instrumentation amplifier is rated 5V voltage. TAPE AND REEL is adopted to pack the instrumentation amplifier. Buffer amplifier has a quiescent current of 3mA.
OP213FSZ-REEL7 Features
8 Pins
supply voltage of 15V
126.02dB voltage gain
Output Type: Rail-to-Rail
OP213FSZ-REEL7 Applications
There are a lot of Analog Devices Inc. OP213FSZ-REEL7 Instrumentational OP Amps applications.
- Radar
- Broadcasting
- Hand-held batteries
- Test equipment
- Laptop
- Video amplifiers
- Fission chambers
- Video data acquisition
- Power control
- Polarized electrodes
