OP2177ARMZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP2177 |
| Pin Count | 8 |
| Number of Channels | 2 |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 400μA |
| Output Current | 10mA |
| Quiescent Current | 500μA |
| Slew Rate | 0.7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 125 dB |
| Current - Input Bias | 500pA |
| Max Input Voltage | 15V |
| Voltage - Supply, Single/Dual (±) | 5V~36V ±2.5V~18V |
| Output Current per Channel | 10mA |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 75μV |
| Gain Bandwidth Product | 1.3MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1300 kHz |
| Voltage Gain | 126.02dB |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 15μV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Wideband | NO |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP2177ARMZ-REEL Overview
It is packaged in an 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. An op amp ic of the General Purpose type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins on it. It is important to remember that this op amp should be operated at a voltage of 5V volts. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. There are 8 pins on this chip. Regarding input offset voltage, buffer amplifier rates 75μV voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 1mA and 10 . You should keep the voltage gain at 126.02dB for the time being. There are a total of 2 channels available on the op amps. The linear amplifier is packaged by using a TR axis. There is an 500μA quiescent current running through op amp ic.
OP2177ARMZ-REEL Features
8 Pins
supply voltage of 5V
126.02dB voltage gain
OP2177ARMZ-REEL Applications
There are a lot of Analog Devices Inc. OP2177ARMZ-REEL Instrumentational OP Amps applications.
- Ultrasound transducers
- Car stereo
- Voltage regulation circuit
- PDA
- Test and measurement instruments
- Thermocouples
- Image computer boards
- Measurements of Wheatstone bridge
- Communication
- Computer workstations
