OP249AZ

2 Channels 36mA per Channel 30pA 90 dB Instrumentational OP Amps 15V ±4.5V~18V OP249 8 Pins 8-CDIP (0.300, 7.62mm)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-OP249AZ
Package: 8-CDIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 196
Description: 2 Channels 36mA per Channel 30pA 90 dB Instrumentational OP Amps 15V ±4.5V~18V OP249 8 Pins 8-CDIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
ECCN Code	EAR99
Terminal Finish	Tin/Lead (Sn/Pb)
Subcategory	Operational Amplifier
Technology	BIPOLAR
Terminal Position	DUAL
Number of Functions	2
Supply Voltage	15V
Base Part Number	OP249
Pin Count	8
Operating Supply Voltage	15V
Number of Channels	2
Operating Supply Current	7mA
Nominal Supply Current	7mA
Quiescent Current	3.5mA
Slew Rate	22V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	J-FET
Common Mode Rejection Ratio	90 dB
Current - Input Bias	30pA
Voltage - Supply, Single/Dual (±)	±4.5V~18V
Output Current per Channel	36mA
Input Offset Voltage (Vos)	750μV
Bandwidth	4.7MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Unity Gain BW-Nom	4700 kHz
Voltage Gain	122.92dB
Power Supply Rejection Ratio (PSRR)	98dB
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	200μV
Settling Time	900 ns
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.000075μA
Programmable Power	NO
Height	3.56mm
Length	10.29mm
Width	7.87mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Mounting Type	Through Hole
Package / Case	8-CDIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	8
Operating Temperature	-55°C~125°C
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8

OP249AZ Overview

The linear amplifier is packaged in a 8-CDIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. An op amp of this type is a J-FET-type. A Tube case is used to deliver the buffer op amp. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 15V battery. It should be noted that this op amp is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Regarding input offset voltage, buffer amplifier rates 750μV voltage. For this electronic part, it is recommended that you mount it with type Through Hole. The buffer amplifier functions well at -55°C~125°C as far as operating temperature is concerned. An 7mA volt supply current is needed for this linear amplifier to operate. You should keep the voltage gain at 122.92dB for the time being. There are 2 channels on the operational amplifiers. The operating supply voltage of the buffer op amp is rated at 15V. There is an 3.5mA quiescent current running through op amp ic.