OP249GPZ

2 Channels 36mA per Channel 30pA 90 dB Instrumentational OP Amps 0.0045μA 15V ±4.5V~18V OP249 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-OP249GPZ
Package: 8-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 243
Description: 2 Channels 36mA per Channel 30pA 90 dB Instrumentational OP Amps 0.0045μA 15V ±4.5V~18V OP249 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Technology	BIPOLAR
Terminal Position	DUAL
Number of Functions	2
Supply Voltage	15V
Base Part Number	OP249
Pin Count	8
Operating Supply Voltage	15V
Number of Channels	2
Operating Supply Current	7mA
Nominal Supply Current	7mA
Quiescent Current	3.5mA
Slew Rate	22V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	J-FET
Common Mode Rejection Ratio	90 dB
Current - Input Bias	30pA
Voltage - Supply, Single/Dual (±)	±4.5V~18V
Output Current per Channel	36mA
Input Offset Voltage (Vos)	750μV
Bandwidth	4.7MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Unity Gain BW-Nom	4700 kHz
Voltage Gain	120.83dB
Average Bias Current-Max (IIB)	0.0045μA
Power Supply Rejection Ratio (PSRR)	98dB
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	200μV
Settling Time	900 ns
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.000075μA
Programmable Power	NO
Dual Supply Voltage	15V
Height	3.43mm
Length	9.27mm
Width	7.24mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 4 weeks ago)
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e3

OP249GPZ Overview

It is packaged in an 8-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. This is a J-FET type op amp. Upon delivery, op amp ic is packaged in a Tube case. We are approaching the 8h termination of the year. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 750μV. For this electrical component, Through Hole is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . Operational amplifier can operate supply current at 7mA. Maintain 120.83dB as the voltage gain. On the buffer amps, there are 2 channels that can be used. The operating supply voltage of instrumentation amplifier is rated 15V voltage. Currently, linear amplifier is operating with a quiescent current of 3.5mA.