OP270GPZ
| Parameters | |
|---|---|
| Frequency Compensation | YES |
| Voltage - Input Offset | 50μV |
| Bias Current-Max (IIB) @25C | 0.06μA |
| Dual Supply Voltage | 15V |
| Input Capacitance | 3pF |
| Input Voltage Noise Density | 3.6nV/sqrt Hz |
| Height | 3.3mm |
| Length | 9.27mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | OP270 |
| Pin Count | 8 |
| Operating Supply Voltage | 12.5V |
| Number of Channels | 2 |
| Operating Supply Current | 6.5mA |
| Nominal Supply Current | 4mA |
| Max Supply Current | 6.5mA |
| Quiescent Current | 3.25mA |
| Slew Rate | 2.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 15nA |
| Max Input Voltage | 12.5V |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 75μV |
| Bandwidth | 5MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 5000 kHz |
| Voltage Gain | 123.52dB |
| Power Supply Rejection Ratio (PSRR) | 116dB |
| Low-Offset | YES |
OP270GPZ Overview
In order to protect the op amps, a 8-DIP (0.300, 7.62mm) case is used. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Tube case. In recent months, the number of terminations has approached 8. A total of 8 pins are attached to buffer op amp. This linear amplifier should be powered by an 15V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. There are 8 pins on this chip. Regarding input offset voltage, buffer amplifier rates 75μV voltage. For this electronic part, it is recommended that you mount it with type Through Hole. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . Operational amplifier can operate supply current at 6.5mA. It is recommended to keep the voltage gain at 123.52dB at all times. As far as the device is concerned, buffer amplifier has 2 channels. The operating supply voltage of instrumentation amplifier is rated 12.5V voltage. There is a quiescent current of 3.25mA in this operational amplifier circuit.
OP270GPZ Features
8 Pins
supply voltage of 15V
123.52dB voltage gain
OP270GPZ Applications
There are a lot of Analog Devices Inc. OP270GPZ Instrumentational OP Amps applications.
- High speed sample
- Multimedia playback equipment
- Wireless base stations
- Medical imaging
- Power transmission
- Automatic control
- Image computer boards
- Mobile phone
- Fast A/D and D/A converters
- Blood pressure sensors
