OP270GSZ
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP270 |
| Pin Count | 16 |
| Operating Supply Voltage | 12.5V |
| Number of Channels | 2 |
| Operating Supply Current | 6.5mA |
| Nominal Supply Current | 4mA |
| Quiescent Current | 3.25mA |
| Slew Rate | 2.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 15nA |
| Max Input Voltage | 12.5V |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 75μV |
| Bandwidth | 5MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 5000 kHz |
| Voltage Gain | 123.52dB |
| Average Bias Current-Max (IIB) | 0.08μA |
| Power Supply Rejection Ratio (PSRR) | 116dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 50μV |
| Bias Current-Max (IIB) @25C | 0.06μA |
| Dual Supply Voltage | 15V |
| Input Capacitance | 3pF |
| Input Voltage Noise Density | 3.6nV/sqrt Hz |
| Height | 2.35mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
OP270GSZ Overview
There is a 16-SOIC (0.295, 7.50mm Width) case in which the instrumentation amplifier is packaged. A General Purpose-type buffer amplifier is shown here. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be 16 terminations in the next few months. The total number of pins on linear amplifier is 16. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 16 pins are located on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 75μV voltage. Surface Mount is the recommended mounting type of operational amplifiers. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. A supply current of 6.5mA can be used to operate this linear amplifier. The voltage gain should stay at 123.52dB. As far as the device is concerned, buffer amplifier has 2 channels. The operating supply voltage of instrumentation amplifier is rated 12.5V voltage. The quiescent current is 3.25mA.
OP270GSZ Features
16 Pins
supply voltage of 15V
123.52dB voltage gain
OP270GSZ Applications
There are a lot of Analog Devices Inc. OP270GSZ Instrumentational OP Amps applications.
- Signal transformation
- pH (acidity)
- Portable media players
- Wireless base stations
- Precision measurement
- Communication device
- Large motor controllers
- single/dual op amp sum and difference circuits
- Inverse/same-phase proportional circuit
- Home audio systems
