OP270GSZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | OP270 |
| Pin Count | 16 |
| Power Supplies | +-15V |
| Number of Channels | 2 |
| Operating Supply Current | 6.5mA |
| Quiescent Current | 3.25mA |
| Slew Rate | 2.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 15nA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Input Offset Voltage (Vos) | 75μV |
| Gain Bandwidth Product | 5MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 5000 kHz |
| Voltage Gain | 123.52dB |
| Average Bias Current-Max (IIB) | 0.08μA |
| Power Supply Rejection Ratio (PSRR) | 116dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 50μV |
| Bias Current-Max (IIB) @25C | 0.06μA |
| Input Capacitance | 3pF |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Voltage Noise Density | 3.6nV/sqrt Hz |
| Length | 10.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP270GSZ-REEL Overview
The linear amplifier is packaged in a 16-SOIC (0.295, 7.50mm Width) case which makes it easy for the consumer to handle. Op amps are General Purpose types of amplifier on the chip. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. The number of terminations approaches 16. A total of 16 pins are attached to buffer op amp. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. Instrumentation amplifier is a part of Operational Amplifier. It has 16 pins that make up the linear amplifier. Op amp rates 75μV as input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, op amp ranges -40°C~85°C. Operational amplifier can operate supply current at 6.5mA. The voltage gain should stay at 123.52dB. The op amp ic has 2 channels on it. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. Currently, linear amplifier is operating with a quiescent current of 3.25mA.
OP270GSZ-REEL Features
16 Pins
supply voltage of 15V
123.52dB voltage gain
OP270GSZ-REEL Applications
There are a lot of Analog Devices Inc. OP270GSZ-REEL Instrumentational OP Amps applications.
- Strain gauges
- Portable electronic products powered by batteries
- Industrial applications including automation
- Mobile phone
- Cinema or auditorium audio system
- Precision measurement
- Wireless base stations
- Oscilloscopes
- Video amplifiers
- Home audio systems
