OP275GPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | OP275 |
| Pin Count | 8 |
| Operating Supply Voltage | 15V |
| Number of Channels | 2 |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 4mA |
| Quiescent Current | 2.5mA |
| Slew Rate | 22V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Audio |
| Common Mode Rejection Ratio | 106 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~22V |
| Output Current per Channel | 90mA |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 9MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 9000 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Power Supply Rejection Ratio (PSRR) | 111dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Bias Current-Max (IIB) @25C | 0.35μA |
| Dual Supply Voltage | 9V |
| Load Impedance | 2kOhm |
| Height | 3.43mm |
| Length | 9.27mm |
| Width | 7.24mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP275GPZ Overview
It is packaged in an 8-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. An op amp of this type is a Audio-type. Instrumentation amplifier is delivered in a Tube case. The number of terminations approaches 8. Linear amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 15V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 1mV. This electrical part should be mounted using type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 5mA and 10 . Keeping the voltage gain at 106.02dB is the best course of action. Instrumentation amplifier has 2 channels on it. The operating supply voltage of instrumentation amplifier is rated 15V voltage. 2.5mA quiescent currents are flowing through buffer op amp.
OP275GPZ Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
OP275GPZ Applications
There are a lot of Analog Devices Inc. OP275GPZ Instrumentational OP Amps applications.
- RF cable systems
- Tablets
- Measurements of Wheatstone bridge
- E-book readers
- Thermocouples
- High speed sample
- High/low-pass filter circuit
- Proportional operation circuits
- Wireless base stations
- Addition operation circuits
