OP27GSZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 170mW |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP27 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 5.7mA |
| Nominal Supply Current | 4.67mA |
| Quiescent Current | 5.7mA |
| Slew Rate | 2.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 15nA |
| Max Input Voltage | 11V |
| Voltage - Supply, Single/Dual (±) | ±4V~18V |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 25μV |
| Gain Bandwidth Product | 8MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 8000 kHz |
| Voltage Gain | 123.52dB |
| Power Supply Rejection Ratio (PSRR) | 114dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 22V |
| Voltage - Input Offset | 30μV |
| Dual Supply Voltage | 18V |
| Neg Supply Voltage-Max (Vsup) | -22V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP27GSZ-REEL Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. Buffer amps of this type are called General Purpose-types. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. We are approaching the 8h termination of the year. Buffer amplifier has a total of 8 pins on it. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The buffer op amp includes 8 pins. There is an input offset voltage of 25μV for this buffer op amp. For this electronic part, it is recommended that you mount it with type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. An 5.7mA volt supply current is needed for this linear amplifier to operate. 123.52dB should remain the voltage gain. The op amp ic has 1 channels on it. The linear amplifier is packaged by using a TAPE AND REEL axis. 5.7mA quiescent currents are flowing through buffer op amp.
OP27GSZ-REEL Features
8 Pins
supply voltage of 15V
123.52dB voltage gain
OP27GSZ-REEL Applications
There are a lot of Analog Devices Inc. OP27GSZ-REEL Instrumentational OP Amps applications.
- Medical instruments
- Multiplication circuits
- Exponential operation circuits
- Portable media players
- Fission chambers
- Addition operation circuits
- Signal transformation
- High input resistance broadband
- Automatic control
- Signal operation
