OP27GSZ-REEL7
| Parameters | |
|---|---|
| Voltage - Input Offset | 30μV |
| Dual Supply Voltage | 18V |
| Neg Supply Voltage-Max (Vsup) | -22V |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 170mW |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP27 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 5.7mA |
| Nominal Supply Current | 4.67mA |
| Quiescent Current | 5.7mA |
| Slew Rate | 2.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 15nA |
| Max Input Voltage | 11V |
| Voltage - Supply, Single/Dual (±) | ±4V~18V |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 25μV |
| Bandwidth | 8MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 8000 kHz |
| Voltage Gain | 123.52dB |
| Power Supply Rejection Ratio (PSRR) | 114dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 22V |
OP27GSZ-REEL7 Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. This is a General Purpose type op amp. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. There have been a total of 8 terminations over the past year. The total number of pins on linear amplifier is 8. It is important to remember that this op amp should be operated at a voltage of 15V volts. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. Linear amplifier includes 8 pins. Op amp rates 25μV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureAs long as the supply current of the chip does not exceed 5.7mA, this op amp ic can operate. Voltage gain should remain at 123.52dB. On the buffer amps, there are 1 channels that can be used. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. As a result, linear amplifier's quiescent current is 5.7mA.
OP27GSZ-REEL7 Features
8 Pins
supply voltage of 15V
123.52dB voltage gain
OP27GSZ-REEL7 Applications
There are a lot of Analog Devices Inc. OP27GSZ-REEL7 Instrumentational OP Amps applications.
- Semiconductor detectors
- Communication
- High input resistance broadband
- Precision measurement
- High/low-pass filter circuit
- Power generator
- Automation control systems
- Inverse/same-phase proportional circuit
- Multimedia playback equipment
- Signal amplification
